vF Tuner for the 3.5L Tacoma

Mind dropping into the normal flash thread and providing an update?

 

Those are the MX market Tacos.

I think they only get ATs?

See the attached TSB.

 

i’m using 89 octane fuel so haven’t flashed your tune yet. I’d want to try it if you were to make a reg octane version.

 

@OVTune @tonered

I did a new log today with a lot of different full pedal runs.

I did manage to get some full throttle, but it was strange to say the least.

here is the overall picture (obviously all of these are not full throttle, but a bunch were, just try to match up the absolute load values)



now here are the close ups after trimming the CSV in VF.

1st gear shifted to second gear without going full throttle



As you can see it hit full throttle at first, then as the rpms rose it lowered automatically to around 45-55

here is a full throttle run in 3rd gear from a low rpm



Same, went full throttle, then went back down, i never lifted, look at the rpms, it dropped at around the same number

Here is a first full to second full throttle



This time i revved to 7k in first and it never hit full throttle in either, but it didnt do that weird drop off.

The only difference between the first 2 pictures and the last one, i turned off traction control for the last one.

weeeeiiiiiird.

Its probably my fault, i may have done this to myself. maybe not though. Still would be interesting to know

 

@runmc

 

This is torque control going on.

Find the map "engine torque Nm"
Raise the values until you get full throttle

 

Thanks will try.

 

Edit**** find the 2D map full throttle tinge torque / torque under full throttle.

Make sure you are on latest update! The map should be flat 4000

Raise values according to RPM until full throttle is achieved.

 

1st and Reverse for 2Hi, 4Hi, and 4Lo. I have them all set to 100%.

Full control and moderation!

 

updating since i dont have that map

first time ive closed VF all week.

 

i did this already

no limits, even if i dont use them

 

Interesting!

Hopefully you can find what's missing.

 

Tony, what’s the process to update vFTuner?

 

im just poking for fun now. supposed to rain all weekend with this hurricane, so i cant go fishing.....well i could.

i just download the installer again from the main ov tune website and reinstall.

 

Curiously, how often do you use 4lo? I’ve wondered why it is always left out in those statements and then I start to hear parts breaking in my head when I imagine turning those up. Now I am intrigued.

 

If you get this, PLEASE be sure to share your findings! I'm, "spending too much time with my OV Tune"... I'll be taking a little break

 

after weeks of mind debating, ive ordered my vr tuned today.. 100% of this forum recommended this product so hopefully im not disappointed

 

If I get a chance to make a regular version this weekend, I’ll send it over.

 

I haven't been on in a while and been able to read all the post's. Has the VF files for 04B04 been released?

 

Yes. Request them via zendesk