2nd Gen ARB Single Compressor Install

I could not find this info easily so I decide to do a quick write up. All the info I found was about Turd Gens... Hope it helps.

What fuses to jump for your ARB Single Compressor on a 2nd Gen Tacoma?

Using the add-a-circuit / fuse jumper dealie doos...

I tapped into the #1 Fuse Slot (15A) with the red-yellow wire for power and I tapped the #3 Fuse Slot (10A) with the blue-white wire for illumination...



ARB installed behind rear passenger seats in the cab...



If anyone is interested in this project I may do a quick write up on how I did this. It took some doing but I'm pretty happy with the result. I have a second battery under the hood making it difficult to find room for this upgrade and I didn't want to spend the coin for the bed mount box... so in the cab it went!

 

So your saying he should have used the open fuse spaces ?

 

Showing...

 

You Sir are a man of few words