2020 off-road grill to trd pro grill camera

Here are the pics and observations:
1. The height adjustment doesn’t work as well as expected. It really doesn’t do much.
2. When you hit the ok button, it starts all the values at 0 again the next time you go back into the screen. Since I maxed out on tilt up/down, I couldn’t go up even more the second time.
3. When you tilt it up, it changes the angles of the lines. So the straights lines are now angled.
4. I think the best bet might be to flash the software version for a pro version. That might be more intense

Baseline


adjusting vertical pitch?



Adjusting height (I hit ok after vertical pitch and it set the value to 0 but kept the adjustment)



camera


shameless photo op

 

Can a TRD Pro 2020 user please post their software version?

 

Got it matching the taco

 

Following this because I'm about to do the same thing. @yshin80 did your taco come with the advanced technology package? Thats a stock camera you are using? If so then I hope you can fix it because I'm in the same boat!

 

I got advanced tech. Stock camera for off-road. I’m running out of ideas

 

can you take a picture of how the 360 view looks at the max height and lowest height?

 

What happens when you adjust the horizontal?

 

Might not be until Wednesday I can get a pic but I’ll try

 

Move it left and right. So your left line would be straight and continuous but your right would be way off

 

I just got a trd pro grill as well. Transfered over the front camera from my 2020 limited tacoma and im getting a same effect. The lines are a little off. Anybody figure out how to adjust the stitched image for this?

 

How did you mount the camera? I had to make a mount.

 

new here and new to Tacoma’s. Anyway did you get a pro grill with a camera mount? Oem or aftermarket? Attempting to do this to my limited to ditch the chrome but having a hard time finding a grill with the camera mount. What’s your old grill. Interested in selling it?

 

I had to make a mount.. Luckily i found a 3d file someone posted on thingiverse so i downloaded that and got a friend to 3d print it for me. https://www.thingiverse.com/thing:4545345

 

Make sure you don't use PLA, if you park your truck outside it'll warp.

 

Nope used PETG!

 

I use HTPLA (high temp). Bake it in the oven for an hour or so and it strengthens up - only the high temp PLA does this. Worked inside the vehicle in southeast georgia over the summer and didn't warp. I think I even printed it with only 20% infill. Previous attempts with regular PLA curled up real bad.

 

So I'm not 100% sure but I ran across another thread somewhere (cant find it now) but I think the TRD Pro has a different front camera (the part numbers were different that were posted). This leads me to believe that the camera is using a different lenses to compensate for the height adjustments.

 

Using my simple detective skills, looks like you're probably be right.

867B004020
Description: SR5; SPORT PACKAGE&BACK MONITOR-WITH(PANORAMIC VIEW MONITOR),TYPE B:REFER ILLUST.; RADIATOR GRILLE-MESH & WITH(CAMERA)&BACK MONITOR-WITH(PANORAMIC VIEW MONITOR),TYPE; RADIATOR GRILLE-MESH & WITH(CAMERA)&BACK MONITOR-WITH(MULTI-TELLAIN MONITOR),TYPE; OFF ROAD PACKAGE&BACK MONITOR-WITH(PANORAMIC VIEW MONITOR),TYPE B:REFER ILLUST.; OFF ROAD PACKAGE&BACK MONITOR-WITH(MULTI-TELLAIN MONITOR),TYPE B:REFER ILLUST.; B:REFER ILLUST.; B:REFER ILLUST.;

This part number specifically lists the TRD Pro

867B004030
Description: SR5; GRN305..DCB..6F; TRD-PRO PACKAGE&BACK MONITOR-WITH(MULTI-TELLAIN MONITOR),TYPE C:REFER ILLUST.; RADIATOR GRILLE-MESH(TRD PRO) & WITH(CAMERA)&BACK MONITOR-WITH(MULTI-TELLAIN MONIT; OR),TYPE C:REFER ILLUST.;

Price is the same for both, about $420

 

I put the view adjustment back to factory location. Two picks show full range of height adjustments.

 

yeah it doesn't look like it changed much. the max height adjustment is 0 though? that's weird.