Tufskinz Mud Flaps?

I'm loving the throwback look of these Tufskinz mud flaps with the 4wD on them. I tried a search on here to get some reviews of how these fit but haven't seen much discussion about them. Anyone install these and if so, how's the fit compared to others out there or OEM mud flaps?

I purchased some OEM's for my '19 SR5 DCSB but I didn't realize they can gouge and rub the fender flares so I don't think I'm going to install them (white truck). Thinking these may be another option.

Here's what I'm looking at: https://www.tufskinz.com/product/mud-flaps-fits-2016-2020-toyota-tacoma

 

I have them installed front and rear. They are made of thick textured material with a small amount of flexibility. They are completely flat and not form fitted like the OEM ones.
Install is super easy; 30 minutes for all 4 tires. The spacers and bolts are all included. Just don’t over tighten them.

I like them a lot and have had good experiences with other Tufskinz products like the tailgate letters, dash inlays, trim pieces.

 

I went with RokBlokz, but only have them on the rear.

 

I have the Tufskinz mud guards. They were one of the first things I put on the truck.
I have the front and rear with Cement letters to match the truck. They were easy to install. They are flat and just a bit flexible.

 

Thanks @Taco_mike73! Those look pretty dang sweet! I appreciate you putting the photos up.

 

The white letter ones would look good on the back of your truck.

 

Thanks! I was thinking the same thing. Kind of retro/modern vibe.

 

Nice pic nice truck too

 

Are they a bit wider than OEM s (rear)?

Anyone have a measurement ?

 

Here's the email I received from Tufskinz this morning regarding size and fitment:

"The rough dimensions are 11x15 and we have not hear of any issues about rubbing but please check the clearance of your wheel from the wheel well for ample room before ordering. Our product is only .118 inch thick so not much room is needed but if your tires rub against your vehicle when turning all the way left or right I would advise against it as we cannot guarantee the part will hold up against that. If you have any other questions please let me know."

 

I have them. They work just fine and install is easy. They are made to order so expect a 2 week turn around.

 

My mud flaps came in yesterday and I got them installed (10 mins, super easy).
The front flaps are about two inches shorter than the new OEM Tacoma flaps.
Rear are about an inch shorter than OEM flaps.
They are about a half much wider than both front and rear OEM, they come in at 11” wide.
I like the look of these a little more than my OEM flaps. Plus they won’t scrape up my fender if I want to remove them.
No rubbing that I can tell yet on my 265/75 r16's on stock suspension.

 

The writing is cool with the old school theme. Wonder how they compare to the RekGen setup: https://rekgen.com/collections/frontpage/products/gen3-tacoma-mud-flaps-1

 

I wish they’d adopt that old school loop circle around the 4 wheel. That would be a good retro nod too.

 

The logo sold me for sure. I think they’re pretty close to the Rekgen’s in terms of size. They’re not super flexible but way more flexible than OEM. They just aren’t rubber flexible if you know what I mean.

 

very cool product.

 

Im very happy with mine. I highly recommend. I bought mine through Amazon.

 

I wanna order these! Anybody have any issues with them breaking or any kinda defects? I dont go offroading or anything like that. Rekgen and rokblokz dont have the 4WD logo or else i probably wouldve went with one of those.

 

No issues with mine. They fit like a glove and I like the sizing and fit if these way better than OEM.

 

i would like to update the molded mudguards on my 19 sport but, i want more protection, not less. i would love to have the flaps a bit wider but, really want them longer. having shorter flaps is a no go for me. the current molded factory guard hangs down 9" from the bottom of the box panel, in the rear, and almost 10" in the front. 12" and 12" would be great! having the measured flap 11x18, v.s. 11x15 would be more beneficial for me. would love that old school 4wd logo as well.
Ski