rpms low?

any one with a 3rd gen tacoma...complain about the idle @ stops or parked seems low? mines is about 600 rpms..no check engine light?
also all is idling fine and it shakes a little...normal???

 

Seems normal

 

Spot on.

 

normal i think.

 

so I'm guessing we're all having the same problem... anyone ever thought of raising the RPMs..pros / cons

 

Gawd no. 600 is great, IMHO. I did lower the cold start RPMs though. 1,500+ was ridonk.


OVT does smooth out the warm idle RPMs significantly.

 

600 on mine.

 

I might not a mechanic or anything so a legitimate question... what would raising the RPM do while being idle?

 

my cold starts (in the morn) are about 1200 at first..but i was referring to raising rpms from 600 to like 700 at stops....

 

stop the shaking or feeling like its gonna turn off....just a thought

 

Hmmm.. mine idles the same as yours but never really felt any (significant) shaking or felt that engine would turn off.

 

well.... it's not turning off but when the rpms are low sometimes it makes me think that. but it's idling fine and every once in awhile it does a rough shake...just ordered a blue driver so I'm going to see if any codes come up...maybe its just me..lol
btw...by rough shake i mean i shakes a little more than idle...not the whole truck shaking...

 

Unless the RPMs dip during that shake, nothing wrong.

There is a low RPM engine trouble code if you had issues with the idle.

Load on the system can cause idle fluctuation like AC, power steering, etc.

 

rpms only go down to 600's or so @ stops/parked..the only time i notice the extra shake..never @ higher rpms...

 

On my 2020 v6 auto, rpm at idle in drive, or reverse is 600. In park 800. This is will a fully warmed-up motor.

 

600rpm while in D and stopped is normal.

What is "problem" that you feel you're having?

 

It’s not a problem. It’s normal for almost any new vehicle. No point in idling at 1000 rpm if you don’t need to

 

the truck is working fine I was just questioning the 600 RPM.... besides that it shakes a little bit sometimes wanted to see if it was normal

 

600 rpm idle is normal, shaking at idle is not.

 

once again....shaking is minimal but there.... that's why I was asking was 600 RPMs normal and that little shake normal some say yes some say no I guess I'll have to figure it out