Sas parts-all sold

ALL SOLD

PRICES REDUCED bump

1400 for the housing and shafts.

1300 for third

350 for steering box with flat arm

2700 for the housing, steering box and arm and third in a package deal.

50 bucks a set for stock shafts. 2 left

still open to offers on all parts

Ruffstuff axle housing passenger drop with rcv custom length inners (birfs are spoken for) Wms-68 in
Spring perches are set at 31.5 inches but could easily be changed by moving driver side perch.
lube locker-1650or best offer

5.29 high pinion 3rd with Yukon zip locker built by sexton offroad-1350

Trail gear 4 in hd springs-sold

Psc steering ram limited to Toyota steering-sold

Trail gear steering box with hydro assist ports with sky’s flat steering arm-400

Single double hole Toyota high steer arm trail gear-50

Toyota spindle and knuckle-sold

Mile marker Toyota locking hubs-sold

Stock shafts with birfs-50 a set. Have 2 sets

Toyota pitman arm- 3rd gen 20, 1st gen 15

All prices are obo. Will ship. Buyer paying shipping.

Will Only trade for 14x2.5 fox coilovers, 12x2.5 fox triple bypasses, 2.0 bumpstops, 3.4/5vz Toyota supercharger, solid axle industry 6 lug hubs and certain fabrication tools.

Bump. Open to offers



Selling my hole front setup. Could essentially buy this, a front and rear hanger from sky’s or wfo or whoever sells a full width hanger and put it all together.


Ruffstuff Toyota axle for sale or part out.

Pretty much everything you can do to one.

Ruffstuff axle housing passenger drop
5.29 high pinion 3rd with Yukon third
Knuckle gussets
Wms-68 in
Spring perches are set for full width at 31.5 inches but could easily be changed by moving driver side perch.
Painted with black steel it

 

And spare parts

Steering box tapped-300

Single high steer arm-115

Knuckle-50

Spindle-50

Stock shafts-75 a set

Locking hubs-150

Tie rod ends-50 one right one left

With used 75

Pitman arm 3rd gen- 40

1st gen pitman arm-25

Misc seals and bearing etc-85

 

Taking offers on parts. Let me. Know what you need

 

how much for all of it?

 

Hubs and knuckles are sold. Here is the updated list of what’s left

the more you buy the cheaper it gets


Ruffstuff axle housing passenger drop with rcv custom length inners (birfs are spoken for) and 1.5x.25 wall dom tubing with fj80 tie rod ends. Wms-68 in
Spring perches are set at 31.5 inches but could easily be changed by moving driver side perch lube locker-2000 or best offer


5.29 high pinion 3rd with Yukon zip locker built by sexton offroad-1600


Trail gear 4 in hd springs-150


Trail gear steering box with hydro assist ports with sky’s flat steering arm-430


Single double hole Toyota high steer arm trail gear-100


Toyota spindle and knuckle-100


Mile marker Toyota locking hubs-sold


Stock shafts with birfs-75 a set. Have 3 sets


Toyota pitman arm- 3rd gen 40, 1st gen 25


All prices are obo. Will ship. Buyer paying shipping.


Will Only trade for 14x2.5 fox coilovers, 12x2.5 fox triple bypasses, 2.0 bumpstops, 3.4/5vz Toyota supercharger and certain fabrication tools.

 

@MattJakobs just fuckin do it

 

You buy my uppers, lowers, bumpstops, and coilovers - then down

 

What bumpstops lol. Maybe we can work out a trade

 

Not hydro, durobumps

 

I do need uppers and my lowers need the bushings anyways...plus I need coil overs LOL

 

what's a lube locker?

 

No rtv to seal the third. It’s like a reusable gasket. Greatest thing ever lol. Google it

 

So the lube locker gasket cost $2000? A little confused

 

It’s the housing, shafts, steering links, u bolt plates and hardware and lube locker. Weird spacing screwed it up.

so far your the only one to screw it up lol

 

Lol

 

Fixed

 

how old is the steering box and how many runs on it?

 

Steering box is 3 ish years old. Was new from trail gear. Not sure how many runs but truck sat for most of 2019. It does have a small leak from the sector shaft but I have a full rebuild kit for it minus the sector shaft seal as I’ve already replaced it once.

 

Bump. Make offers. Also have 6 12x2.0 fox shocks I’ll sell. And a front spring hanger set up for full width axles.

 

I might be down for 4 of those foxs