What Have You Done To Your 2nd Gen Tacoma Today?

Rear leaf TSB and Grillcraft w/color matched grill.

 

Finished my ScanGauge II Blend Mount installation. Had cable under headliner but wadded up on dash. Today, took off A-pillar and routed cable down then pushed it under dash. Coiled ScanGauge II cable and put behind kick plate. Wire tied Cat5 coupling to harness and made connection to OBD2 port.

Wire routing went so fast that I did the dome / map light mod. I was happy to see that diode was not necessary. I disconnected the connector, pulled the tab, and stuck a mini-blade screwdriver into each connector terminal. Prying lightly allowed wires to be pulled out and reversed (white wire in middle and white wire with stripe to outside. I stripped about 3" off end of wire to be run to dome light and stuck it into the empty slot. Reassembled the connector. When I plugged the connector back in, I made sure to capture the stripped wire on the ground wire blade and stay clear of the hot blades. I fished the wire across the headliner to the dome light. I double checked which end of the bulb turned on the map lights. I didn't have a screw the proper size so I once again stripped off about 3", fed it through the dome to the bulb side, and trapped the wire in the clip with the bulb. I may go back in and make a more permanent connection if I go in and install LEDs.

Rod

 

Have front hitch receiver from CBI on order for about 4 weeks now. Should be here in time for Christmas. Ordered illuminated 4x4 switch kit on eBay. Should have it next week. $$$ for mods adding up.

Rod

 

looked at it and it is soooo shiney......but its almost salt on the road time

 

i'm working on my Satoshi grill and the custom emblem from metalmiller is in work!

 

I looked at my Truck and said Damn this truck is Badass

 

Me too

 

HI FIVE !!!!!!!!!!!!!!!!

 

fixed my squeaky door.

 

fucking sweet!

 

5.2 litres of Mobil 1 5W30 and stock Toyota Filter... and also drained out the old oil

 

i thinky you cuz that no look like a door ......

 

my entire fender was pushed back due to an accident awhile back. so i had to move the entire fender forward and out. so i had to take off everything. and i put in my foglights too since my bumper was out

and no, if i was i'd still be out there in the morning doing it lol

 

Added a couple of this things....



Then stood back and said what "Manwithoutaplan" said!

 

Ok, why is this thread in 2nd Gen now? First it lived in 1st Gen, then Tech Chat, now 2nd Gen...
I don't like it in here b.c I never visit 2nd Gen...I have a 1st gen!!!

 

x2!!

 

added these tow hooks and got my Budbuilt skid installed

 

Yesterday, Grillcraft and rear spring TSB. Today, 5100's installed @ 1.75:





Now I need tires and rims.

 

just a picture of my new cooper m&s s because it did happen. great tires in the snow no doubt about it !