What Have You Done To Your 3rd Gen Today?

Welcome toTW!

 

Being short ain't so bad, it's much easier finding pants that fit.

 

I'll be going with the wet okole here soon! They also send swatches to color match. I couldn't handle that much blue on the interior so I'll definitely be going with gray. I'll be watching out for your's installed!

 

For me it would be. If I could get a nut behind a fastener then I would do that as well.
The short answer is that I would use a nut anywhere I could and a rivet nut anywhere I couldn't.
My HiLift, recovery boards, axe, shovel and soon my RotoPax and 4lb extenguisher will be secured via rivet nuts.

 

I'll get a picture of mine when I get a chance!

 

It’s the things he will be raking in a pile in about 4 weeks!

 

Installed Diamondback Cover, will be posting OEM cover in B/S/T once I get pictures of cover off truck.

 

Ich wette, er weiß, wie man ein anderes Bier auf Deutsch bestellt

 

Dos cervezas por favor...oh wait that’s Spanish.

 

Got my Mystery Rag Bag from The Rag Company.

 

Maybe so but I speak cerveza!

 

I think my wife shrinks my pants in the dryer, the length is fine but the waist seems to shrink and they won't button -- weird huh??

 

I have that same folding table! I love it and use it for everything. It has so many holes and cuts in it, its spattered with bed liner and spray paint too.

 

Noch ein Bier bitte!

 

Looks like things are about to get serious.

 

Mine gets delivered tomorrow. Looks like decent value for the money!

 

LOL My first year in Germany (Stuttgart) was 94 and I had just stopped drinking. It was a rough road...ahahahaha. I stayed till 2000 and never had a drop.
Zim

 

Nope, you're definitely not the only one. I did the wiring for the lightbar and the ditch lights myself; both use a relay and wire harness provided by the each kit, and go to separate switches, but the biggest offender for RFI on my truck seems to be the DD foglight pods, and those just use the existing truck wiring, and are controlled by the factory fog light switch on the turn signal stalk.

My antenna is in the bed on a wheel well, and I don't notice any difference in RFI when I relocated it to the roof. A local ham operator suggested trying ferrite chokes on the power cables feeding the LED lights, but I haven't tried that yet. When I do I'll let you know for sure if it helps.

 

DUDE i have ferrites both ends of pos/neg leads, still nothing, dammit

 

Several others have said this and I have realized it applies to me...many of the upgrades on my toco help to keep me sane. I have a new upgrade that now seems necessary but I need help. My wife has a hybrid lexus. I'm not only convinced that the start button is aluminum but I am also convinced I now need an aluminum start button. I haven't see the option for a taco but I think many of us would buy an aluminum start button if it were an option. Looked up the part for the hybrid lexus and it's 200+ for a replacement button. Website did not indicate the material its made from and 200 seems like a lot of money for a taco button mod. I considered wrapping the current button in tin foil but though it may not look right. I don't have a solution but I think many of us may need an aluminum start button. I know it's not Friday but I still would like to hear your thoughts. I don't have experience with fabricating things but based on the collective experience I see on this site, it may be a simple mission for some of you.

This is the start button on a lx 450H. Color is cool as well.