*THE RTT Owners Thread (With BS)*

Most likely the last hurrah for the year up in the White Mountains. Great times!

 

beautiful pics.

 

Any Details on the crossbar and mounting parts used? I have snugtop with Yakima tracks and trying to mount my rtt to it but I want it to sit low as possible like yours looks.

 

I made my own mount with the hardware you see because I wanted the rtt to sit at low as possible, be a stronger mount, and cost less. I believe I accomplished all three objectives. The additional cost was more time to design & build. Go to 8020.net to learn more about the hardware I used, although I purchased mine from McMaster Carr. Engineers use this stuff all the time to build custom structures etc for their needs. It takes me about 10mins to mount or remove the rtt. If you decide to go this route, I can take additional photos for you if you want.

 

I'm close to finally pulling the trigger on a RTT... has anyone noticed any changes in quality from Tepui after Thule took over?

 

where do you guys store your tent in the winter? i have a car port that should keep the snow out that i was going to put my rack and tent in. no garage so unfortunately it cant go inside. there shouldnt be an issue with it sitting outside under a cover through winter right? should i get one of those mattress plastic bags and cover the whole thing?

 

Quality is good with mine.

 

I take the mattress out and put it in one of those plastic mattress bags that way bugs/mice don't get in it and tear it up. I usually toss the mattress in the garage or in our attic for the winter. Then I close up the tent and previously put it in a storage locker at the local lock and store. As long as its out of the elements it should be fine. They are built to be outside quite a bit so just make sure you toss an extra tarp over it if it has to sit uncovered all winter and strap the tarp down good so it doesnt flap in the wind. They are like sandpaper if not strapped down. I would also get it up off the ground like sticking it on blocks/saw horses so rodents are less likely to make a nest in it.

 

Under a carport should be fine. Probably a good idea to cover it or put it in a bag. If you seal it in a bag, just make sure it is completely dry first.

 

If you're looking for a deal, this ARB will be going cheap.

 

OUCH! It actually looks like its holding up pretty well considering........

 

Just got my iKamper Skycamp delivered, but now waiting on Mobtown to deliver my bed rack

 

Those are my goals also! I checked out the website. Prices seem great. Would you be able to post more pics and if possible a list of hardware and parts used? Thanks.

 

Im going to have to ground tent for a year..... (got my fiance and friends asking me how it feels to be a peasant camper)

 

i still love my canvas ground tent. Is amazing for multiple night stays in the same location.

 

Im planning on picking up a 3 person from fb marketplace/craigslist. Ill also be able to use the buddy heater in the tent . Just need to make it through winter.. and then 6 more months after that

 

i use the heater in the rtt too. i like to live dangerously

 

Sorry, I don't have any links or a parts list, but i can tell you most of what I used. The 2 cross bars are 1.5 X 1.5 inch by 48 inches long (already cut to length). I used M8X1.25 for all mounting hardware. I recommend using a longer, double hole threaded T-Nut for the tracks on the shell (where my finger is pointing) for more engagement/strength in the thin aluminum track. I only use one of the threaded holes to attach it tho. I had to enlarge the holes in the 4 plates where the tie downs go thru.
Like I said, it does take a bit of time to purchase & first time install It's Not for everybody.
Single hole T-Nuts. Work fine in cross bars.

 

Bummer dude...hope all involved are ok