Long Travel BS Thread

Just a heads up, if you’re making room for the TRD SC, note that the intake runner’s outer edge aligns with the brake fluid reservoir’s inner edge. Most of the single hoops you will see go straight up off the coil over mount, then 90 over towards the passenger side.

 

Pretty sure it was Amazon. Possibly summit but I don’t remember. They’re nice, came with the mounting bracket.

 

@tacotunner06 ’s putting a 6.0 in his truck

 

I’ve seen a bunch but not one like that with the nice mounting bracket

 

https://www.summitracing.com/parts/...MIh_SV8NXm7AIVOh-tBh1KSwkqEAQYAyABEgI13PD_BwE

summit is was. Here they are

edit: and I just modified the bracket a little and welded it to the cage

 

6.2.....but close enough lmao
yeah i just gotta clear the lsa supercharger....

 

Well that’s just not fair lol.

 

hopefully! Getting to the end of my passion for this junk lol could go buy a used R8 and have it be turn key

 

began life as a 6.0?

 

TVS3100?

 

No idea lol, whatever comes on the ctsv. They can be had in good shape used for like 1500, send it off for a rebuild and get a new top cover/heat exchanger and it’s good to go!

 

Finally finished my SUA!

 

For those who have weighed their truck at the dump, did they charge you? And how much?

 

I’ve done it, no charge

 

Modern problems require modern solutions, this has been on my mind for years lol

 

Holy moly I need to see more of this launch or a video!

 

Is it common to lose steering angle after putting LT on a 1st gen?

 

Yeah, for any vehicle.

 

What can be done to get some back?

 

Take it over to any Pilot or gas station with a Cat scale. It's $8 and they give you front and rear axle weight.