What have you done to your Tacoma today? 1st Gen Edition

Ik i have pans. @Tour991 will remember what i have. I just don’t remember what condition they are in

 

Everyone knows "universal" means oe fit for a 99 honda civic

 

I've got a new pan for 6lug 4x4 2.7. Took it off the new motor to swap to rear sump for the 4runner.

 

PM me for PAYPAL payment address, need one ASAP
or email me directly gusto11071@outlook.com

 

installed IS300 headlight and wiper switches. Wiper switch is intermittent AND has the mist function. And the plan is make the AUTO function on the headlights functional.

 

Mahalo!

 

I just swapped mine out this weekend. You can have it for the cost of shipping. I'll PM you some pics tonight if you are interested.

 

When the awd tcase in my 4 runner stoped working I planned on making a controller for the front diff actuator and using a jshift

I made a schematic that I believe would have worked to control the actuator, you only need 4 of the 6 pins at a time btw

Power and ground to 2, continuity that automatically breaks when actuated on the other 2

A 2 position rocker switch and 2 relays with 4 switched contacts each are all you need along with a lot of wire

 

Anyone know what kind of connector this is called?

 

Looks like a circular din but the notch is different from standard connectors. What's it from?

 

It’s a connector to my headlights. Do your guys’ headlights have a little Velcro box that goes up in the corner?

 

Not stock for sure

 

Nope. I’m just tryna replace it though because the light is broken

 

Looks like someone swapped in aftermarket LED bulbs.

 

I'd look for a part number on the ballast and go from there.

 

wiper switch works? And I’m curious about the headlight switch if you can get it to work

 

Thanks for the info. Were you able to get it to work with your diy harness?

 

Well, it wasn't a harness, but it did work... The front diff actuator is the same concept

Ground goes directly to the motor positive goes to the actuator cover that makes contact with a thing on the rotating gear that bridges to another contact on the cover that goes to the motor

As the wheel rotates to the actuated position the contact breaks and the actuator stops all you need to do is provide power and ground to 2 pins and bridge 2 pins

https://youtu.be/YA0zL7GnwQc

The computer went out, it shifted when it wasn't supposed to and broke something in the tcase

After a new t case and computer it all worked well