What Have You Done To Your 3rd Gen Today?

The installed vent is a one-way vent to allow pressure to release inside the pumpkin so as not to blow the oil out of the seals. Sometimes that vent gets clogged and allows pressure to build up and push the oil past the seals. Plus it can get stuck OPEN and now water can get inside the pumpkin. The newer vent is 2 way and allows it to breathe and is way high.

 

I have not seen any discounts noted anywhere, maybe a Black Friday sale on the website soon?

 

They're in my pile.
Damn pile!

 

Thanks for choosing us!!

 

Got rid of the bro grill and installed a new mount for my Glock.

 

Thank you, sir!

 

Welcome to TW Mike!

 

Victory 4X4 bumper install. It is the blitz. There was about 1 minute of cutting and its not something anyone would see. I like it overall and the weight doesn't seem to bring down the front of the truck. I have not installed a winch yet. Install take a couple hours if you go slow, I kept watching the install video and just went step by step. Per the video I should have had some washers in the parts box but they did not include any. Other then that it was fine.

 

Ordered some @SCSPerformance Ray 10s last night. And gonna install some smoked sequential side mirror lights from TacomaBeast.

 

Are they Red or Orange?

 

Tossed some Eibach Pro Sport shocks on the back of my cement truck today. 45 minutes and pretty basic. It already feels more cushy. Like a childhood dream. Hopefully I get the time to drop the front struts in tomorrow.

 

Speaking of..... any thoughts on adjusting the hood / fender gap? My trucks only 6 months old so maybe I just have the dealer do it. The gap down one side is like 1/8” and the other sides like 3/8”! I’ve thought about trying to loosen the bolts and see if it will “slide over” 1/8” but I’ve never adjusted a hood. Open to input.

 

Broke a tailight so added new PRO taillights today and put in Hella xtreme yellow fog bulbs.

Ordered the PRO taillights from Cobb County Toyota....$284 with free shipping.

 

Prop open the hood with a piece of 2x6 so most of the weight is in the front (and not loading the hinges). Loosen the bolts until they're hand-tight then slowly move the hood over. Remove the 2x6, close the hood, and check the gaps. You may need to loosen the hood latch bolts and reposition that as well.

 

Sorry I worded that poorly, I understood your meaning. Going to try it this weekend.

 

Orange

 

Damn... guess I'll have to paint mine. Thanks for the reply!

 

My Diamondback finally came in today. Mounted and ready to go!

 

Get the dealer to do it.

 

Gave her the ole spitshine....which was a 2 day process of wash, clay, wash, Turtle Wax Hybrid Ceramic polish and wax, and finished with Turtle Wax Hybrid Ceramic Spray. Also did my gfs car the same way but she drove off to work before I could grab some pics. This was my first time doing this and the polish and wax did a fantastic job of correcting many of the scratches I've accumulated over the miles. Links to the products used below the glory shots. Pups thought it was pretty ok too! Whew

$24 Mothers 07240 California Gold Clay Bar System

https://www.amazon.com/gp/product/B0002U2V1Y/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

$13 Turtle Wax 53412 Hybrid Solutions Ceramic Polish and Wax, Removes Car Scratches and Swirl Marks, Provides Water Repellency, Protection, and Shine, Hand or Machine Application, 14 oz. (Pack of 1)

https://www.amazon.com/gp/product/B07XYPS3PV/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

$14 Turtle Wax 53409 Hybrid Solutions Ceramic Spray Coating, Incredible Shine and Protection for Car Paint, Extreme Water Beading, Safe for Cars, Trucks, Motorcycles, RV's and More, 16 oz. (Pack of 1)

https://www.amazon.com/gp/product/B07XYPS3PS/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1