Tacos in St. Louis area

That's what's up

 

Zip tied license plate gang

 

I was laughing when I saw that

 

Where was that riding at?

Also, is that a flatbed on the red truck?

 

Moonlight in Sullivan, MO

And yep. @TacomaDad18 on Insta for more pics.

 

Happy vets day, fellas.

Whether your service was gnarly, boring, long, or short we still appreciate you.

 

Hey all. I’m new to TW and am looking for advice.

Had readylift bilstein 6112 f / 5100 r installed last week. Mounted at higher notch (the way they come.)

Wayyy aggressive UCA angle and cv angle could be better. Looking for thoughts/ advice.. I think it needs to come down 1 in in front and new UCAs (probably SPC so I can keep my tires / wheels (285/70/17 on TRD Pro wheels)

think this will cut it or will I find new issues with rubbing ?

Thx!

 

Welcome! SPC control arms are pretty good, quite a few guys run them. The only way to fix your CV angle would be a 1 inch diff drop, I don't know who has one. As far as i know none of us have a diff drop

 

Thanks. I included the diff drop at time of adding suspension.

also getting the vibration everyone mentions

 

Did you do the ecgs bushing?

 

not yet. Not sure what I’m getting into.

 

It's not bad, if you put it in 4wd and the vibration ceases, it's def the ECGS bushing.

 

It’s def the bushing but I think I need to drop it an inch to get better geometry first + UCA then realignment

 

Just be careful. There are pros to a diff drop.... There are also cons. Like loss of ground clearance.

 

Its so weird how hit or miss this is. I still haven't done it.

 

Same

 

Who’s going to Shamrock Shakedown in March?

 

I plan to