Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

Well worn 315/75r16 right now. They are around 33" currently. I'll be tubbing for the 37s for sure, just like everybody

 

Do you have a spacer on top of your coil bucket? Which JD kit is this? Looks narrower than the Total Chaos 2.5” mid travel arms

 

It's JD's +2.25 kit, with the shock eye to Tacoma mounting plate adapter that they send out with their kit.

It's slightly wider than TC's 2" kit, and narrower than their 3.5" kit. With my super bumps in the front instead of hydro bumps, I'm cycling around 12" of travel. I think to get the full 13" you need hydros

 

Oh gotcha. Didn’t realize that it comes with an adapter to run standard King shocks and not the Tacoma specific ones. Looks good!!

 

yes, new tank is 36gal.

 

Any shots of that front tire stuffed? Is it too wide to tuck into the fender?

 

Sorry man didn't grab a picture of the stuffed tire. Definitely way wider than the fender though. My tire poke is pretty bad. My fenders are trimmed back around 2.5" as well

 

I was going to say it looks like you are missing a little bit more on the bumps looking at the pics. That's cool you gained almost 2" more height in the rear for that. Just remember going up that just means you can get more twisted and not carry a tire or wait longer before carrying a tire.

My 63s I think it's time to order a custom set of alcans one side seems to be flattening out. I've got to get some measurements and see for certain it's just got a lot of taco lean it didn't have before.

 

What's the angle on that? Like 20-25* off center? Assuming angles are kept the same, DCLB should work all the same correct?

 

CA legal?

 

Looks good and makes me want to play with our forklift at work the next time I drive the truck.

 

Yes. JD found a tank that fits between the frame rails. Truck was laser scanned and they designed a cage for it. Stay tuned! Parts should be back from the laser cutter service sooner than later.

 

Oh so it’s going behind the axle? From what make/model/year?

 

Could be a fuel cell couldn't it?

 

Not legal in CA I think

 

Unless you can hook up all the evap stuff???

 

Yeah, looks like only fords and gmc pickups in specific years can even have a specific auxiliary fuel tank. CA sucks lol

 

Not sure m/m/y. It's CARB compliant transplant from a production vehicle.

 

For sure. Forklift also doesn't max it out like a proper hit, or flexing while driving does.

Flip itttttt. I don't think my little walky forklift could if I tried haha

 

We’ll see how close the boss is watching tomorrow