San Antonio

Morning Mark

Morning Kurt

 

What do you do when the wife buys a large roll of bubble wrap on clearance? When you said you were getting SHRINK wrap?



Say thank you, and use up what you can on the North side of the greenhouse!






That ought to absorb some heat too!

Waiting on pump number 2 to show up today to complete that task. But I have the new wire run, and tubing splice ready.

 

My mom bought the 10x12 green house from hoes depot supposed to show up next week

 

Palram brand?

 

This one

 

Thats gonna be one fun project putting it up

 

It was 2300 dollas

 

That's a Palram alright. You are going to be busy. Find a clean space in your garage where you can lay out everything, sort everything, and leave it until you use it.
And make sure the build is square and level! They hold themselves together!

 

It is not an inexpensive one at all! Your grade and foundation (to anchor) will be a lot of work too! I spent almost a month on mine if you just count work hours. But on my schedule, it was still April through June before I actually got a plant inside.

Oh. BTW. The instructions are international pictorial. Not one word of do this or that!!!

 

If she uses Facebook there is a Palram Owners group I belong to. Everything from She Sheds to commercial start ups and between, like me. It's a utility greenhouse for winter protection, and converts to summer fun with veggies. Let me know if she is interested. There is a simple quiz to join. Like TW. No insults or politics allowed.

 

Picked up a new shop light for my workroom, makes a huge difference over the 2' light that's been there since 1988.




The pictures don't really do it justice, it's much better lighting.
I know it's messy, I just finished installing my Wife's lift and have not fully cleaned up yet.

 

Anyone missing a second gen?



Found it in a river bed

It's on the right side at the bottom of this hill.



Looks like someone tried to recover it after it rolled but gave up and resorted to pulling whatever they could.

 

How are you going to just leave the drivetrain? I mean, the engine is a bit pinned, but they could have taken the rest. I would have figured that chit out, drag it out on a pallet with a winch if I had to. Dang.

You got GPS coordinates on that?

 

I just checked my driveway!

 

That's been in there for forever.

 

Probably a joy-ride stipper!

 

Just patch up the bullet holes and you're good to go


I'm not sure if I was proud or annoyed that I could tell it was a second gen Tacoma just by seeing it from this angle.

Here's the engine


Pretty worthless. Mother nature would give you a pat on the back and you might get a few bucks in scrap if anyone really wanted to go pull it out of there.

You've got to drive trough a dump to get to it though



Anyone need a boat?



....people suck.

 

Been down there?

Possibly

 

Looking so blue

Looks good

Where is it at?