Dasaita Head Unit for 2nd Gen Tacoma

I have that already, just can’t get anything to work, they’re sending me a new one.

 

Anybody figure out how to turn down the ringer when you get a call?

 

you mind if I bounce a few things off you?
First this is my OEM deck

this is my dasaita


They sold the Canbus as plug n play, yet I have these 2 wires, are they for the steering wheel controls


Both rca video plugs attach to their own white plug on the Canbus that has nowhere to plug in to the car side connectors


This connection doesn’t seem to do anything deck side


These are the unused car side connections

 

this static you guys are talking about is it coming though all the speakers? i got static only coming out of the front passenger speaker and tweeter..all the others sound fine..

 

Static should be a grounding issue related to the Canbus. Is your ground solid, can you isolate the Canbus any further inside your dash?

 

So SaitaNav is sending me a DYX004 cable to see if this addresses my steering wheel controls not working. From what I can gather from taco tunes is this cable is what I need to connect to on the vehicle side.

And the CB004 does not have this plug.

 

is there a ground behind the head unit?

 

You can make one with a washer and a sheet metal screw.

just tap into that metal bar that runs along the back, once I get my wiring situation figured out that’s what I’ll be doing.

side note do you have the entune deck or the regular deck?

 

im just tripping on why it would only be 1 door and not the rest... theres got to be a lose connection somewhere, im running out of things to check on the passenger side though lol..
i guess id have to look up a diagram to find the ground wire.. but even if it was that i would think it would be all the speakers in the truck acting up not just 1 door

 

ok so i came across this going over the wire on the harness on the android unit.. the main power plug has this black wire coming out of it.. and then theres 7 other black wires tied into that one, and they all go to the other plugs.. i took back the shrink tube to check the wires and some were frayed a bit as you can see in the pic... wondering if this could be causing the issue with the passenger door.. ill prolly cut it up and re do it just to be sure..

 

only 1 of those wires outta the 7 go to the main plug.. all the other plugs dont get used i think.. im tempted to just cut them off lol

 

Are you using the CB004 harnass on the non jbl deck?

 

no clue on the harness... my tacoma is non jbl though

 

Did you buy that extra cables

Dasaita Car Radio Power Cable Adapter Canbus Wire Harness for Toyota Camry Prado Corolla RAV4 Fortuner 2012-2018 JBL Amplifier AUX 360 Camera Steering Wheel Control Backup cam…

https://www.amazon.com/gp/aw/d/B07YKJFK8G?psc=1&ref=ppx_pop_mob_b_asin_title

or

did you just use the cables it came with?

 

so far i only use these..

i dont use all this


there is a lil black box that connects to one other plug but im pretty sure it does nothing lol

 

used the one that came with the unit

 

Do your steering wheel controls work?

 

negative

 

Ok - Steering wheel controls now work!!!!
Camera doesn’t and I’m not convinced it’s supported with their kit. That’s ok because I have it in my rearview mirror.
SaitaNav had me switch to Canbus in the factory settings, I switched back to SWC and it all started working.
Prove me wrong, but with the non jbl deck, regardless of factory backup camera, you do not need the CB004 on 2.5g

 

well...... im pretty sure i just found the problem... im no expert, not sure how to fix this.. im guessing with a ground.. but where? or some insulation between the door and mount? was just messing with the tweeter and spark and music when out.. and it would come back when it sparked again.. explains why it would go out when i was just driving.. the bass vibration would make it spark and go out.. im guessing this would cause the static on this side to? heres a link to the spark show https://www.youtube.com/watch?v=zR5oFPuuIXQ&feature=youtu.be