2021 4Runner Pro Wheels Ready For Order

Yes. I just remove my front dust cap.

 

The oem black dust cap that covers the axle nut on both the front.

 

Really interested in these wheels, and think they look great on your truck. A little apprehensive about the dust cap issue though. Seems like those gotta be there for a reason, and not sure I would want them removed. Any chance of fitting these wheels without removing the dust caps?

 

The rear fits fine but the front won’t fit unless you remove the dust cap. It’s just there to protect the axle nut from getting dirty with water or debris a lot of drivers take those off anyways.

 

Well, that kind of sucks. Love the wheels, but expect to be in conditions prone to dust, dirt, and water and don’t want the hubs getting grimed up and/or rusting prematurely.

Wonder why install would require removal of the dust caps? Can’t imagine the caps are left off the new TRD 4Runners from the factory.

 

About to pull the trigger on a FOX

$1,023 2.0 IFP Fox 2.0 Performance Coil-Over Front Pair compatible with 2005-2016 Toyota Tacoma

2.0 IFP with an AAL in the back hoping to get around a 3" lift level with it all said and done, Im most likely going with these new 4rnr wheels on a BFG ko2 in 285/70/17. My question is, from a youtube video with the same set up from 88 rotors they didnt do a cmc or new UCA, will i need those done to mine to eliminate rubbing?

 

when I had these pro wheels and 285s with lift I only had to cut some plastic. I did have adjustable uca which allowed me to push the wheel forward some. So you might get a little rubbing.

 

Feeling excited and Nervous, just ordered 4 of these new Wheels, going to be wrapping them with BFG ko2s in 285/70/17. Going with a Bilstein 6112/5100 2" lift, I think its going to look good on my truck. Anyone have any good recommendations on a set of black lugs?

 

Does the OME 888s give an extra 1" lift on the 5100s? did you change out your UCA and or need a CMC? Your trucks set up is what i would like for mine, there are so many options with these trucks i dont know what to go with.

 

which cmc plate is that?

 

FabZoneArmor. They do some good work! Look them up on IG.

 

Anyone have actual specs including the weight per wheel?

Also anyone know weight of stock OR wheels?

 

I'd like to see these on a cement taco... I dig the black emblem

 

Wonder how it looks under that red? Thinking of painting/pc'ing a set of these another color and the red gots to go....

 

lift, wheels and tires went on yesterday. really digging these wheels.

 

Hi all, just purchased the new 2021 PRO wheels (PTR56-89210-F2) to replace the stock 17" wheels on my 2020 TRD Sport (4261104200). I called my local Toyota dealership to have them installed. The service advisor mentioned that there's a possibility that the TPMS currently on there might not fit / transfer over to the new install due to the angle. Just wondering if anyone has run into this? Thanks!

 

Swap over my tpms from my off road rims and no issue with fitment.

 

No problems here with mine, 2017s fit with no issues into the new wheels.

 

Honestly wasn't digging these wheels until I saw this post, as I have a black 2019 trd sport...
Was going to put on the SEMA trd pro wheels but now idk wtf im gonna do.

 

Just picked up a set of these, really digging how they look. 2019 TRD Off-Road, 265/70R17 Toyo Open Country AT III's, stock suspension.

Forgot about the dust cap issue when I gave these to the installer. They didn't mention any issues and the dust caps are still on so they must have just forced it over and tightened down. We'll see if there are any issues getting them to come off.