What Have You Done To Your 3rd Gen Today?

He pumped it in reverse, like in Ferris Bueller's Day Off

 

How does the TRD OR differ from the SR/SR5, in respect to the wheel clearance?

 

Bishop Tate Black Customized Side Rear View Mirror Dynamic Turn Signal in smoke


Paired with the Apex Predator (Alpha Black) headlights! (Ka-Chow!)

 

Plasti dipped my stock wheels with copper metalizer... Now I need to find black lug nuts

 

Damn, my secret is out!

There is a chain of gas stations in Denver that have those laser car washes. Anyway, if you buy an annual card, they take $3/gallon off for up to 20 gallons. Apparently $0.019 is the lowest it can go though. They are have a sell on the annual card for $88. So after saving on the gas (about $2.60/gallon) it comes to about $42 for 365 washes. Not a bad deal. Wash it 3 times and you’re ahead.
https://topdogcarclub.smarttecommerce.com/members/index.jsp

 

In all honesty, I'm not sure. I just know that they have slighty different tire sizes from the factory: OR is 265/70/16 while SR5 is 245/75/16. So they have a similar diameter, but the OR is almost an inch wider.

And they have different suspension set ups too, but I'm not sure if that makes a difference in allowing bigger tires. All I really know is that I have an OR and have run a couple of different 265/75/16 tires and have never had an issue with the larger tires rubbing on the wheel well or mud flaps.

 

Do you know specifically which Velcro you bought? Coincidentally, I did the exact same install yesterday but for some reason I cannot get the Velcro strip to adhere to the dash. The adhesive keeps failing after a few hours.

 

I have a manual with a FJ cruiser knob. I’m currently running a drilled garden hose cap as my boot collar:

 

Bam wholesale has some

https://www.*****************.com/oem-parts/toyota-genuine-oem-toyota-wheel-lug-nuts-black-pvd-quantity-of-6-pt0766020002

 

Drove up into the Uintas to cut a Christmas tree (first snow with 4wd—even on stock tires with a trailer didn’t skip a beat).

 

Why did you choose these over the Morimoto brand. I can't pull the trigger on which ones to get. Wanted some input on why you chose these.

 

Put on 285/75/1

 

Nicely done...where did you get your side steps? Can't find long-bed length for the life of me.
12Tac

 

Thanks got them off N-Fab website about two months ago. Good luck trying to get anything right now!

 

bahahaha. I peeled off the locker sticker on the door and the one on the bedside for the power outlet. The ones on the visors don't bother me that much. I put the stickers somewhere, but the dealership don't give two f**ks if there is a sticker there or not at trade-in. They don't check if the jack is under the back seat either. "Wellllllllll, we could have given you $22,400 for your 8 year old truck with 100k but you peeled the locker sticker off and its going to cost you. We'll give you $22,390."

Would rather not have anything there than having a piece of glorified electrical tape stuck to my door panel for the next 15 years.

 

https://parts.olathetoyota.com/oem-parts/toyota-set-of-6-wheel-lug-nuts-black-pvd-pt0766020002

 

Is that right? I thought the Tacoma lugs have the flat washers on the bottom?

 

I’m no Toyota technician. the website verified it for me based upon trim, year etc

 

There are parts list forum for the 2021. I used that part number. Haven’t actually seen the lug nut off.

edit. 2020

 

Yeah looking on the Bam url (after fixing it) on the previous page looks more like I'm remembering. Just wanted to mention so if anyone buys them they research first and make sure they get the right ones.