What Have You Done To Your 3rd Gen Today?

Churn it like butter

 

Great video! Thanks! I wish I had done those when I did my initial build. One thing worth mentioning, put some anti-seize lubricant on the cam tab bolts, while you have them out, so they don't freeze up.

 

I would be careful with sizing up IMO, I just installed BFG KO2s on my stock height 2020 TRD Sport...265/65R17 - The clearance is very tight and I think if I went up a size I would have been forced to cut.

 

Truck is now totaled.

 

Yea. He should say it was like that from the factory and demand a brand new pro.

 

Got some ditch lights installed and wired in, cleaned up the harnesses, installed the harness in the rack for some scene pods (just waiting on the pods to get here now), cleaned up some of the wiring to the aux fuse box, and installed the Weboost unit.

 

I get these ammo cans free from work So I decided to mount one up in the bed for some extra waterproof storage. Gotta work out the locking options but for now I have it mounted up sitting on the wheelwell, bolted to the bed rail.

 

Finally got a few of my planned mods done.

New tires(Falken Wildpeak 265/70/17’s)
Eibach suspension
Deaver leaf pack
Diode Dynamics SS3 Fogs and Switch

 

Okay, thanks for the feedback. Much appreciated.

 

After my fuel pump recall was done on Friday , I ordered a Gas Tank Skid. It's on sale. Free Shipping. On an SR5 you don't have to change or mod the straps. This doesn't bolt to the bottom of the tank if you don't want to.
https://www.summitracing.com/parts/...ArkoJYi8NxJ8aNsVhxLqJhslspFGckWhoCe6sQAvD_BwE
If anyone has one post up a pic.

 

Just had a spa day and a shoe shine.

 

Mounted my DIY road shower and 3D printed supports on my Yakima HD bars

 

Swapped out the stock shocks for the adjustable Bilstein 5100’s, ikon AAL in the rear, and just threw on wheels and tires yesterday.

 

Today I cleaned my truck for an upcoming road trip with my wife and daughter. 7 hours will be my 9 month olds longest trip yet.

 

Just had a friend finish a paint correction and ceramic coat in/out. Also had to buy touchup paint at the 1,000 mile mark, think I got clipped by the neighbor in the parking garage. Fairly deep into the plastic, friend did a nice job cleaning it up and fading in the touchup. Next is the SCS Ray 10's 17x8.5 -10. waiting for the Eibach 2.0 coilovers and ProTruck shocks in the rear, no lift for now, just gonna sit leveled on 265/70 KO 2's. Maybe 285's when tires need replaced again.

 

Pulled the 4x4 and V6 badges off the tailgate today just to clean it up. They'll be put on my gf's Ford Fiesta. See if she notices...

 

Very nice just did the same. What size tire did you go with?

 

From this


To this in 1 day.

 

Finally got around to doing my CMC. I'm pretty pleased with the outcome.

 

That's a lot of lumber for a bird feeder.