What have you done to your Tacoma today? 1st Gen Edition

How many trucks can we fit in there?

 

4-5, 7-8 if we evict the chevelles he stores in there.

 

Anybody know of a company besides Rago that makes bed stiffeners for 1st gens? Or is that the only one

 

I think total chaos does too

 

Nope just 2nd-3rd gens

 

Hmm maybe not then, they're super easy to make though,

 

You could ask @TMFF nicely if he has any more.

 

just make your own if you can. Super easy, took me like 3 hours ish? As as was packing the truck up that same day haha

 

No but have thought about it. Didn't have time for that this go around.

 

Whats the advantage of those?

 

Are the holes already pre-existed? Or do you have to drill them?

 

The bedsides are kinda floppy I remember on my 1st gen the tailgate/bed body lines were off so I shoved the bed a couple times on each side and was able to bend them back

 

Helps prevent the bed from flexing and cracking, not as big an issue with our trucks as it is with the 2nd/3rd gens and their composite beds. But if you carry a lot of weight it can be an issue

 

Installed the supercharger!

 

To keep the bed from spreading. If you look at your tail gate some aren't straight gapped anymore. More common with bed rack installs.

Mine was splitting right at the bed rails just past the tail lights. Welded it up this summer.

No have to drill them yourself.

Yeah mine has washers. But I wouldn't mind doing a long piece of steel under there.

 

Installed a switch to enable/disable the DRL module on my 01
Old timey switch on the right.

 

Yup. Pretty easy to make and save a little coin in the process.

 

I just got my salvage yard seats and console installed. I posted a pic in this thread on Sunday. 2001 Matrix with almost same color interior as one of my 95.5 trucks.

I had to use spacers under the outside legs, and cut and weld on the front, inside tab to match the seat reinforcement weld nut location. W/O the spacers, the seats would not have been level in the left to right direction. I was able to use the vertical attachments on the rear inside leg without any changes.

Blocks stand out too much now, but I will find some paint to tone them down a bit. Ugly, but worth it for the extra comfort of the new seats.

These seats sit higher,with the blocks but are perfect for me at 5'11" and with the way I like to hold St Wheel.

Side by side passenger seat for color match:



Front, inside leg mod:

Welded this in place on the new seats.

Image of the (ugly) spacer blocks. Definitely need some gray paint:



Glamour shots (as much as a 25yr old truck give):






@hogeyphenogey per your request

 

nice. looks good.

Another option would have been to cut off the tacoma seat bracket and cut off the matrix ones then weld on the entire lower bracket to the matrix seats. I bet that could also lower them down a touch too if that is ever an issue.