What Have You Done To Your 3rd Gen Today?

Is that a film over the fogs?, was it difficult to remove the plastic trim around the fogs?, thanks

 

Not sure of the type that owner used, but I just put LaminX film over my fogs and it was pretty easy. You don’t need to pull any trim. And it goes on dry. I did use a trim tool to push the edges of the film under the bezel.

 

Just dropped my truck off for the fuel pump recall . Saw this in the dealership.

 

A tailgate lock is smart even if you don’t have a cover. Thieves can steal your tailgate without it. It’s worth it just for the piece of mind.

 

2!
But only because I had to find my forceps to plug in the map lights........, because my fingers must have gained weight too.

Couldn't be happier with the amount of light Meso's Ultimate Dome and Map lights put out, exactly what I was looking for. If you're looking to really light up the cab in your Tacoma these lights won't disappoint.

 

Nicely done Nick, nice clean job!

 

Just T-tapped it? Can you run the stuff off the USB and cigarette lighter at the same time with no issues?

 

I installed my film on the fogs before I installed them. You can install without removing any trim around the fogs by removing the grill and installing from the inside.

 

My dealership has some nice classics in it as well.

 

@averagejp
Uses existing bolts, one each. Takes longer to get the correct size wrench out of the tool box than it does to install them. As easy as it gets.

 

Mine has a nice one too.

 

Always good to see a fellow NEPA Tacoma owner out and about!

 

I did that already but with Vivid film, I will redo it come spring because I'm not happy with some curls in it. I think a heat gun might help...thanks

 

Was thinking of installing speaker grills like you did. Care to share some details about the install?

 

It’s like a Toyota museum. Pretty cool

 

Early Christmas present. Demon brackets and new D rings.

Like Bob just said. Install is as easy as it gets. It’s a zero beer job

 

Not exactly today but I like to put some work in with the Taco. Love being able to do all the same things with this little truck as my buddies with their big Cummins!

 

No job is a zero beer job. You have to plan the project so it takes at least one. Lol.

 

That CaliRaisedLED 30" bumper light bar is BRIGHT!! It shocked me how bright it is and I've never had an issue in the almost two years I've had it installed. Their wiring harness and buttons are amazing as well. I should also mention that I had an accident where I fell through ice while driving forward and drove a 2 inch piece of ice through my grill and smashed the light bar a couple of inches higher then it was supposed to be, bent the brackets all to hell, 9k in damage... straightened out the brackets and mounted it back on and every single LED still works and the thing took it like a champ. Very water tight and a great LED light bar IMHO. Well worth the money!

Chad

 

Check out the Black Friday 2020 thread on the home page. Page one lists everything on sale. A lot of great Taco related deals.