Calipers/rotors/UCA's 2nd gen - 3rd gen compatibility

Hi friends, I am fairly certain from some google research that these 3 items are cross compatible between 6 lugs. Can anyone confirm or deny? Thank you in advance for your time and consideration.

 

Brakes yes, control arms are slightly different. You can make the UCA's work, its likely very small differences. SPC shows 2005+ for arms but most OEM shows different numbers for 2nd and 3rd gen.

 

I looked at the SPC listing for reference as well! Any idea what the generational difference is between stock. Thank you for the info on the different part #'s

 

Brah?

 

What would be the point of this?

 

only difference that i know of on the front suspension between 2nd and 3rd gen is the LCA (it uses the larger 5th gen 4 runner/2nd gen FJ rear bolt). Outside of that everything should be cross compatible.

 

Found a good deal on lightly used calipers and UCA's but they're off a 2019

 

hey did you go ahead and do this 3rd gen on a 2nd gen swap? I have a 2010 and am looking a guy’s newer calipers off of 3rd gen. Did the calipers work out? Thanks!

 

2005-2023 use the same upper control arms, calipers and rotors.

Jeff

 

Holy crap, how’ve ya been, Jeff?

 

Got a deal on a set of calipers off of a 2020 Tacoma. Put them on my 2010 4wd and can confirm that they fit and are the same as my old calipers.