TRD suspension on SR

Howdy folks. First time post. I have a '19 SR Tacoma with high miles for the year. The left rear suspension is 1" lower then the passenger side rear. I suppose it is the leaf spring sagging on that side. So my question is, I have seen commplete TRD OR suspension take-offs for sale for very reasonable prices. Would this be a good way to go to get my truck sitting level. The ride being firmer would not bother me.
Thanks for your input.

 

That would likely be the infamous “Taco Lean” due to the gas tank and battery being on the driver’s side

 

Adding a leaf to your leaf pack would help with the sag,

Welcome to TW!

 

Is it normal ?, and probably worse when there's a full tank of petrol onboard... ?
The front is level, the back is not..

 

Taco Lean is normal. You could crawl underneath to take a look at your driver’s side leaf springs to see if the are flat or arched the opposite way. Do you tow or haul often?

 

The previous owner towed a trailer for many miles all day long every day ..I don't know exaclty what was on the trailer, but an ATV was for sure.

 

Sounds like the leaf packs could be replaced then. When you have the chance, you could post a pic of it!

 

Thanks man, but I was particularly referring to a pic of the leaf pack themselves lol

 

when I take the wheels off then I could post a pic .. that might be a while.. the left side is flatter than the right side.. however it is not going reverse arc..

 

Gotcha. Also curious to see how many leafs you have. Off-road models should have 3 plus 1 overload. If you have less than that then it oughta be worth finding take-offs!

 

You’ve got the 3 leaf plus 1 overload. If you don’t plan on towing or hauling, you could go with cheap, low-mileage leaf pack take-offs to lessen the lean. I’ve got a full replacement leaf pack and still have a lean. I don’t tow, rarely ever haul anything either.

 

are these springs like the TRD OR springs?

 

Pretty sure the leafs are the same 3+1 for all TRD models. You could certainly swap out your suspension components with TRD take offs. Don’t know if it would really change the ride height or taco lean however

 

They appear to be. If you find a good deal, it would worth the shot. The previous owner just tired your current ones out

 

I have a 2018 SR double cab 4x4, I have the Bilstein suspension from a 2017 TRD OR on with a Supreme Suspension 3/2 lift/leveling kit. Prior to the 3/2 kit I didn't have any issues with the TRD OR suspension. I did not use the leaf pack though. I kept the same SR leafs. I was too lazy to switch them out. I'd agree with an earlier post that the previous owner rode the suspension hard. If you find an OR suspension at a good price take it. I got mine on offer up for free.