What Have You Done To Your 3rd Gen Today?

Best place to get tailgate decal to match my sides? 2021 TRD 4x4 OFF Road. I tried one person referred from someone on here, never got an answer and their email won't go thru.

 

Went for my 1 year service and came out with worse tyre pressures than when it went in...

 

@CBoy808

 

Looks sick.. hows the rubbing?

 

I have little to no fault in the dealership, last time I took mine in for service they put "N/A" for slave cylinder fluid level(it's a manual), said the tires were rotated when they weren't, put down tire pressure was 32 when it was anywhere from 30 to 50psi, and left out 3 of the 6 bolts holding on my front skid plate.

Also 82°!! Must be nice....

 

Twinning!

 

See your dealer about recalls on the springs. On my 2008 2 nd Gen model, I ended up with 3 sets of springs. The originals which bottomed out at 500 pounds and the next batch was better but had a tendency to crack they were so hard. The next one had more bands to keep the broken leafs from puncturing the gas tank. So hit the dealer up for a new set of rear springs. That is unacceptable with just a cap on it.

 

Hmm well i thought with no TSB on my springs i was SOL so i just got some dakars in the mail. Solid advice, wish i tried that route first.

 

They always mess up my tire pressures unless I remember to tell them not to touch. So annoying

 

I couldn’t do it right the first few tries then I read somewhere to start from the back and they snap on easier. It worked for me

 

Same here. Fixed them and they fit perfect now

 

Don’t worry, you’ll love the Dakar’s.

 

Totally unbelievable. Amazing work!

 

I love seeing this! I build miniatures for a living.

 

3 weeks ago, then today! The girl got new rims, tires and a lift.

 

How many miles out of the stock wrangler tires? I am at 15K now and they appear a little more than half gone. I wonder how much Toyota pays for such a short treaded tire?

 

Body Armor 4x4 HiLine Series Front Bumper

 

Also looks like a PRO grill with raptor lights, AND running boards?

 

I was able to catch these finally and installed them...FrontRunner Triple Load Bars on my Diamondback. Install was actually pretty easy. I have a Diamondback SE and only needed to use the nut jacks once for each of the longer rails as screw positions of the rails overlap the Diamondbacks support tubing. Very secure. Silicone'd around each screw and not worried about water. They have a solid gasket as well.

 

Since I’ve last posted in this thread, did a 2” OME lift, 265/75r16 pathfinders, 1.25” spidertrax spacers, softtopper, sleeping platform and last but not least some diode dynamics ssc2 sports for ditch lights.

this coming year I plan on getting wheels, diode dynamic’s ss3 fogs, scene lighting on my prinsu, and possibly some reverse lighting. Then I should be mostly done except for maybe a rear bumper.