3rd Gen DIY maintenance quick reference

jerkwithkeyboard · Sep 14, 2020

BangosTaco said: ↑

So I have a question.. My 2020 didn't come with a oil drain gasket... How important is that gasket till the next oil change?
Click to expand...

I read you post on the other thread.
SO....
buy a gasket or get this .
Fumoto Valve/Oil Change Drain Plug

$23 ez-103 EZ oil drain valve

ez-103 built in o-ring.

when it showed up drain the oil/install what you want/put back in the old oil (i bet it has under 500 miles) and move on with your life..

Amanelot · Sep 14, 2020

BangosTaco said: ↑

So I have a question.. My 2020 didn't come with a oil drain gasket... How important is that gasket till the next oil change?
Click to expand...

I replaced my oil drain plug with one off Amazon that had a magnet. It has a permanent washer on it, and I have not been putting the crush washer on it since i installed it and no leaks.

No experience with the 2020s, so its hard for me to say if you are okay or not. Maybe keep an eye on it and make sure it isn't leaking.

DAS Taco · Sep 14, 2020

Amanelot[OP] initial post: ↑

Wanted to start a DIY quick reference to include things like torque specs, part #'s, specialty tools and quick tips for the standard maintenance items. The intent just to have a quick place to go for people (mainly myself) that may already be familiar with job and don't want to wade through longer step-by-step instructions again to extract details. I will edit the original post as more information is obtained or submitted by others. Will also try to add links to other threads with more complete instructions/pictures/videos when myself or others post. Obviously, I cannot take any responsibility for any problems that arise from using this information or any accidental typos. If there's anything folks are interested in, let me know. Welcome any feedback on how to make it more helpful or if you see a step-by-step thread that could be linked from here, let me know. Also, if you see any errors, let me know and I'll correct.

If you get any dealer services done, and have part #'s on your receipts, please share!

CAUTION: All info in italics is not confirmed. A lot of educated guesses based on previous models and other Toyotas. Please help me correct any typos. As you guys confirm, I'll un-italicize. Thanks!

Also, this post was originally done for V6 autos, I have added some info for other models. Doesn't mean much of it wont apply to all vehicles. But obviously if you have a different engine or manual transmission there will be significant differences in certain areas. Anybody is free to copy and revise for another model if you feel froggy or feed me the info and I'll try to add it.

Factory Service Manual - Thank you @tonered for sharing
https://drive.google.com/open?id=1cx5nnlnCzlhI45D1vbBMj1ni983SKdKf
You can use the "Factory Service Manual Doc ID" to semi quickly locate sections. The PDF can be tedious and difficult to navigate.

Tip:
Give your PDF viewer's "Find" function a minute or two to locate the Doc ID, the factory service manual has A LOT of pages. It will most likely show "0" results for a minute while it searches.

3rd Gen Tacoma Maintenance Log - Can be found on Toyota's website
https://www.toyota.com/t3Portal/document/omms-s/T-MMS-16Tacoma/pdf/T-MMS-16Tacoma.pdf

They should all be the same, but you can search for your year and trim if you like.

Inspect and adjust all fluid levels - every fill-up

Engine oil (0W-20 ILSAC GF-5 oil - Toyota part # 00279-0WQTE-01)
1) Check w/ engine warm greater than 5 minutes after shutting off engine
2) Tip: leave dipstick out while waiting 5 minutes to allow oil in dipstick to drain back down, makes it easier to read
3) Per manual, it’s 1.6 qts from low mark to full mark, don’t overfill

Coolant (Toyota SLLC - Toyota part # 00272-SLLC2, 50/50 pre-diluted, Canada is 55/45)
1) Between LOW and FULL lines with engine cold

Brake fluid (FMVSS No. 116 DOT 3 or SAE J1703)
1) Between MIN and MAX (should be near or at max with fresh pads)

Power steering fluid (Automatic transmission fluid DEXRON® II or III)
1) Between min and max (cold and hot lines provided)
2) Cold - not driven in last 5 hours (50-85 degF fluid temp)
3) Hot - driven 50 mph for 20 mins (140-175 degF fluid temp)

Clutch fluid (FMVSS No. 116 DOT 3 or SAE J1703)

Rotate tires - every 5k or 6 mo
Factory Service Manual Doc ID: RM00000170W00SX

Front to back/back to front on each side
Lug nut torque - 83 lb-ft (21mm)
Check torque ~1000 miles after rotating

Replace engine oil and filter - every 10k or 12 mo (severe: 5k or 6 mo)

Torque specs:
Oil pan drain plug - 30 lb-ft (14mm)
Oil filter cap - 216 lb-in/18 lb-ft (

$18 TOY640 Assenmacher Specialty Tools TOY 640 Oil Filter Socket Wrench for Toyota/Lexus

TOY640 with 15/16" or 24mm socket)
Oil filter drain plug - 120 lb-in/10 lb-ft (3/8" square drive)
No. 1 engine under cover sub-assembly - 22 lb-ft (12mm)
No. 2 engine under cover sub-assembly (off-roads) - 22 lb-ft (12mm)

Parts:
Oil - 6.1-6.2 qts 0W-20 ILSAC GF-5 oil - Toyota part # 00279-0WQTE-01
Oil pan drain plug gasket - Toyota part #

$11 90430-12031 Genuine Toyota - Oil Drain Plug Gaskets (QTY10)

90430-12031
Oil filter element kit - Toyota part #

$47 04152-YZZA1 by Toyota

04152-YZZA1

Special tools:

$18 Assenmacher Specialty Tools TOY 640 Oil Filter Socket Wrench for Toyota/Lexus

AST TOY640 filter wrench (or Toyota SST 09228-06501)
5/8” ID tubing (for oil filter drain pipe)

Tips:
1) Requires removing skid(s) for access.
2) Oil filter has permanent housing, oil filter element kit includes new filter cartridge, 2 new gaskets, and the temporary oil filter drain pipe.
3) Hose for oil filter drain pipe (if used) should be 5/8” ID (15 mm). About $1 at Lowe’s in the plumbing section for clear vinyl tubing. Can help with splashing.
4) Proper torque of the oil filter cap and oil filter drain plug should help prevent the cap coming off before the drain plug on the next change, which can be a lot cleaner.
5) When you remove the filter drain plug, give it a little impact. If you're too smooth, the plug and housing will try and move together.
6) https://www.tacomaworld.com/threads/oil-change-checklist-service-record.462476/ by @RichVT

Lubricate propeller shaft - every 15k or 18 mo (severe: 5k or 6 mo)

Parts:
Spider grease -

$14 Mobil 1 Synthetic Grease, Auto, 12.5 oz.

Lithium base chassis grease NLGI No. 2

Special tools:

$55 Lincoln 1134 Pistol Grip Grease Gun with 18" Whip Flex Hose and Coupler, 6" Rigid Extension, 7500 PSI, Premium Dual Lip Follower, Variable Stroke, Jam-Proof Toggle, Filler Air Bleeder Combo

Grease gun w/ pistol grip and flexible hose for zerk fittings

Tips:
1) Spiders should be greased until fresh grease purges from all 4 seals. Should purge somewhat evenly, or there may be a problem
2) I would not attempt to lube center support bearing. I suspect it is sealed and is meant never to be self-serviced.
3) Only 4wd's have zerks, won't find any on a 2wd.

Re-torque propeller shaft bolts - every 15k or 18 mo (severe: 5k or 6 mo)

Torque specs:
U-joint bolts - 65 lb-ft (14mm/17mm)
Center support bearing - 27 lb-ft (be careful, if it was loose, may need realignment)

Tips:
1) You will need 14mm and 17mm box ends or flarenuts for the u-joint flanges, sockets won't fit
2) The flanges at the transfer case have a 17mm bolt head with a 14mm nut
3) Flanges at the diffs have a 14mm bolt with 14mm nut
4) Recommend a box-end or flarenut crowfoot on your torque wrench, but don't forget to lower your torque setting due to the longer torque arm. Here's a calculator: http://www.cncexpo.com/TorqueAdapter.aspx
5) Will have to remove heat shield at rear of xfer case (12mm)
6) Thanks to @maccus for the detailed info here

Re-torque leaf spring u-bolts - forum recommended

Torque spec:
52 lb-ft (19mm)

Replace cabin air filter - every 20k or 24 mo

Parts:
Filter - Toyota part # 88508-01010 standard filter
Or
Filter - Toyota part # 88508-04010 deodorant filter (surprisingly cheaper)

Tips:
If you don't know how, it's in your glovebox owner's manual

Replace engine air filter - every 20k or 24 mo

Parts:
Filter - Toyota part # 17801-0P100

Tips:
1) Easy job, but don't mess it up. Make sure there's no holes/tears in your new filter. Make sure everything's clean before you open up the box and remove filter. And make sure you have a good mating/seal around entire edge of the filter.

Front brakes - every 5k or 6 mo for visual; every 30k or 36 mo for measurements

Torque specs:
Brake caliper mounting bolts - 91 lb-ft (??mm)

Service Specs:
Pad min thickness: 1.0 mm
Rotor min thickness: 26.0 mm
Max rotor runout: 0.05 mm

Parts:
Rotors - Toyota part #

$90 43512-04052 Toyota Genuine Parts - Rotor, Brake Fr (43512-04052)

43512-04052
Pads - Toyota part #

$98 04465-04090 Toyota Genuine Parts - Pad Kit, Disc Brake (04465-04090)

04465-04090

Tips:
1) Measure runout 10 mm from outer edge of rotor; rotor should be installed with all 6 lug nuts torqued to 83 lb-ft when checking
2) If runout > max, check bearing play and axle hub runout normal before replacing rotors
3) If rotor stuck on hub, use an M8-1.25 bolt in holes on rotors to break it free
4) Install new rotors in position with least amount of runout

Rear brakes - every 5k or 6 mo for visual; every 30k or 36 mo for measurements

Service specs:
Drum max diameter - 10.08 in
Shoe min thickness - 1.0 mm

Replace differential oil - inspect every 15k or 18 mo (severe: replace every 15k or 18 mo)

Torque specs:
Rear diff drain plug - 36 lb-ft (24mm or 15/16")
Rear diff fill plug - 36 lb-ft (24mm or 15/16")
Front diff drain plug - 48 lb-ft (10mm hex)
Front diff fill plug - 29 lb-ft (10mm hex)
No. 2 engine under cover assembly - 22 lb-ft (12mm)

Parts:
Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent - Toyota part #

$48 08885-02506 GL-5 75W-85 Differential Gear Oil

08885-02506
Front - 1.6 qts; Rear - 3.1-4.2 qts (varies with model)
Rear drain plug gasket - Toyota part #

$14 12157-10010 Toyota Oil Drain Plug Crushable Steel Gaskets Set of 10 OEM 12157-10010

12157-10010
Rear fill plug gasket - Toyota part # 12157-10010
Front drain plug gasket - Toyota part #

$3 90430-24003 Front Differential Drain Plug Gasket

90430-24003
Front fill plug gasket - Toyota part # 12157-10010

Tips:
1) Perform with vehicle level
2) Ensure you can remove fill plug before draining
3) Proper level should be within 5 mm of bottom of fill plug opening
4) Re-check level after driving
5) Save new fill plug washer until final check
6) Will need to remove skid plate and may need bottle pump for front
7)

$12 GENUINE TOYOTA GASKET KIT FOR TRANSFER AND DIFFERENTIAL SERVICE

Diff and xfer case gasket kit
8) 3rd Gen Differential and Manual Transmission (6MT) Fluid Change by @Omar RVA
9) https://www.youtube.com/watch?v=VYXCfdGWto8 by @EB Group
10) https://www.youtube.com/watch?v=BW8b3odXVC8 by @EB Group

Replace transfer case oil - inspect every 30k or 36 mo (severe: replace every 30k or 36 mo)

Torque specs:
Drain plug - 27 lb-ft (24mm or 15/16")
Fill plug - 27 lb-ft (24mm or 15/16")

Parts:
1.1 qts SAE 75W Toyota Genuine Transfer gear oil LF or equivalent - Toyota part #

$94 08885-81080 Toyota Genuine Transfer Case Gear Oil LF 75W 1 Litre 08885-81080

08885-81080
Drain plug gasket - Toyota part # 90430-A0003
Fill plug gasket - Toyota part # 90430-A0003

Tips:
1) Ensure you can remove fill plug before draining
2) After filling, leave plug out and let sit ~5 minutes and re-check, add if necessary
3) Diff and xfer case gasket kit

Manual transmission oil - inspect every 30k or 36 mo (severe: replace every 30k or 36 mo)

Torque specs:
Drain plug - 27 lb-ft (24mm or 15/16")
Fill plug - 27 lb-ft (24mm or 15/16")

Parts:
Toyota Genuine Manual Transmission Gear Oil GL-3 (GL-4) or equivalent, SAE

$29 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75W-90
4 cyl - 2.3 qts, 6 cyl - 2.6 qts
Drain plug gasket - Toyota part # ??
Fill plug gasket - Toyota part # ??

Tips:
1) Perform with vehicle level
2) Ensure you can remove fill plug before draining
3) Proper level should be within 5 mm of bottom of fill plug opening
4) 3rd Gen Differential and Manual Transmission (6MT) Fluid Change by @Omar RVA
5) https://www.youtube.com/watch?v=YXbhD67UFTo by @EB Group

Replace automatic transmission fluid - inspect every 30k or 36 mo (severe: replace every 60k or 72 mo)

Torque specs:
Drain plug - 180 lb-in/15 lb-ft (14mm)
Overflow plug - 180 lb-in/15 lb-ft (5mm hex)
Fill plug - 29 lb-ft (24mm or 15/16")

Parts:
Toyota ATF WS fluid - Toyota part #

$79 00289-ATFWS Automatic Transmission Fluid, 192 Ounces, 6 Pack

00289-ATFWS
Drain plug gasket - Toyota part #

$7 35178-30010

35178-30010
Overflow plug gasket - Toyota part # 35178-30010
Fill plug gasket - Toyota part # 90301-15004

Special tools:
Toyota SST 09843-18040 (basically you just need a wire to jumper two OBD ports)
Bottle pump (to use for filling)

Tips:
1) https://www.tacomaworld.com/threads/3rd-gen-automatic-transmission-fluid-level-check-diy.547455/
2) Qty of fluid will depend on what you do. Per the TIS repair manual, it directs 3 drain/refill/circulates for a replacement, so it will probably be somewhere between 10-12 quarts.

Replace engine coolant - inspect every 15k or 18 mo (replace at 100k/120 mo and every 50k/60 mo thereafter)
Factory Service Manual Doc ID: RM0000017DS053X

Torque specs:
NO. 1 Engine Under Cover Sub-Assembly: 22 lb-ft
NO. 2 Engine Under Cover Sub-Assembly: 22 lb-ft (w/ Off Road Package)
Radiator Drain Cock: Hand tight
Cylinder Block Drain Cock: 9 lb-ft

Parts:
9.1-11.1 qts Toyota SLLC - Toyota part # 00272-SLLC2 (50/50 pre-diluted, Canada is 55/45). Qty depends on model, see manual.
Radiator cap - Toyota part # 16401-31830

Tips:
1) Be careful here, there's a special sequence to fill the system and remove all the voids without damaging or overheating anything

Replace spark plugs - Replace at 60,000 or 72 months and every 60,000/72 months thereafter.
Factory Service Manual Doc ID: RM000000SKC05EX - Removal
Factory Service Manual Doc ID: RM000000SKA05HX - Installation

Torque Specs:
Spark Plug - 13 lb-ft

Parts:
Spark Plugs - Denso part # FK20HBR8
5/8" spark plug socket. I use GearWrench part # 80546

Tips:
Electrode gap for new spark plug - 0.7 to 0.8 mm (0.0276 to 0.0315 in.)
Maximum electrode gap for used spark plug - 1.1 mm (0.0433 in.)
Factory service manual calls for removal of the intake and wiring harness, but the job can be done without this step. See here - https://www.tacomaworld.com/threads/2016-tacoma-spark-plug-replacement.554468/
Click to expand...

Thank you!

Anton338 · Oct 8, 2020

ZITROB said: ↑

Im getting ready to do my first service at 15k miles. 5k and 10k were both done at my local dealer. I wanted to see what the consensus is on fluids. Right now I am leaning towards
1. Mobil 1 0w-20 with OEM filter for engine oil
2. OEM ATF WS for transmission drain and fill. I know there seems to be a lot of people on here that don't like the Toyota WS but I don't want to mix fluids and don't really want to go through the trouble of a flush.
3. Mobil 1

$29 75w-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75w-90 in both diffs or redline 75w-85?
4. Not going to do T-case until much later but when I do is Ravenol the way to go if I don't want to pay Toyota prices for the OEM stuff?

Thanks
BOZ
Click to expand...

Really wish the forum had a consensus on fluids. I do like your list though. Mine is pretty similar:
1. Mobil 1 0W-20 Advanced Fuel Economy/Extended Performance and Mobil 1 M1C-251A even though they're like $15 a pop.
2. OEM ATF WS. (Good reasoning. Since a complete flush is so difficult, it doesn't make sense to mix in an aftermarket fluid.)
3. Mobil Delvac 1 Gear Oil

$29 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75W-90. This stuff is cheap from Summit Racing.
4. Ravenol J1C1003 SAE 75W Manual Transmission Fluid - MTF-3 Full Synthetic. (Did this one at 15k. Currently at 40k and have had zero issues with engage/disengage in all temperatures.)

Amanelot · Oct 8, 2020

Anton338 said: ↑

Really wish the forum had a consensus on fluids. I do like your list though. Mine is pretty similar:
1. Mobil 1 0W-20 Advanced Fuel Economy/Extended Performance and Mobil 1 M1C-251A even though they're like $15 a pop.
2. OEM ATF WS. (Good reasoning. Since a complete flush is so difficult, it doesn't make sense to mix in an aftermarket fluid.)
3. Mobil Delvac 1 Gear Oil

$29 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75W-90. This stuff is cheap from Summit Racing.
4. Ravenol J1C1003 SAE 75W Manual Transmission Fluid - MTF-3 Full Synthetic. (Did this one at 15k. Currently at 40k and have had zero issues with engage/disengage in all temperatures.)
Click to expand...

No one can agree, too many varying opinions here

Hiker46 · Oct 13, 2020

Last spring I did the auto tranny drain and fill. Replaced around 3 quarts of the ATF. Tried to do it again and found that the 24 mm socket would slip off the fill plug. The hex head of the plug isn't very tall and I think my socket doesn't have much bite due to the bevel. Is there a special socket or wrench that folks use? Or should I grind down the end of the socket to remove the bevel?
Thanks, Tim

sicki · Nov 17, 2020

2019 SR5 2WD:
what diff fluid 75w90?
how many quarts?

tacocart762 · Nov 22, 2020

Amanelot[OP] initial post: ↑

Wanted to start a DIY quick reference to include things like torque specs, part #'s, specialty tools and quick tips for the standard maintenance items. The intent just to have a quick place to go for people (mainly myself) that may already be familiar with job and don't want to wade through longer step-by-step instructions again to extract details. I will edit the original post as more information is obtained or submitted by others. Will also try to add links to other threads with more complete instructions/pictures/videos when myself or others post. Obviously, I cannot take any responsibility for any problems that arise from using this information or any accidental typos. If there's anything folks are interested in, let me know. Welcome any feedback on how to make it more helpful or if you see a step-by-step thread that could be linked from here, let me know. Also, if you see any errors, let me know and I'll correct.

If you get any dealer services done, and have part #'s on your receipts, please share!

CAUTION: All info in italics is not confirmed. A lot of educated guesses based on previous models and other Toyotas. Please help me correct any typos. As you guys confirm, I'll un-italicize. Thanks!

Also, this post was originally done for V6 autos, I have added some info for other models. Doesn't mean much of it wont apply to all vehicles. But obviously if you have a different engine or manual transmission there will be significant differences in certain areas. Anybody is free to copy and revise for another model if you feel froggy or feed me the info and I'll try to add it.

Factory Service Manual - Thank you @tonered for sharing
https://drive.google.com/open?id=1cx5nnlnCzlhI45D1vbBMj1ni983SKdKf
You can use the "Factory Service Manual Doc ID" to semi quickly locate sections. The PDF can be tedious and difficult to navigate.

Tip:
Give your PDF viewer's "Find" function a minute or two to locate the Doc ID, the factory service manual has A LOT of pages. It will most likely show "0" results for a minute while it searches.

3rd Gen Tacoma Maintenance Log - Can be found on Toyota's website
https://www.toyota.com/t3Portal/document/omms-s/T-MMS-16Tacoma/pdf/T-MMS-16Tacoma.pdf

They should all be the same, but you can search for your year and trim if you like.

Inspect and adjust all fluid levels - every fill-up

Engine oil (0W-20 ILSAC GF-5 oil - Toyota part # 00279-0WQTE-01)
1) Check w/ engine warm greater than 5 minutes after shutting off engine
2) Tip: leave dipstick out while waiting 5 minutes to allow oil in dipstick to drain back down, makes it easier to read
3) Per manual, it’s 1.6 qts from low mark to full mark, don’t overfill

Coolant (Toyota SLLC - Toyota part # 00272-SLLC2, 50/50 pre-diluted, Canada is 55/45)
1) Between LOW and FULL lines with engine cold

Brake fluid (FMVSS No. 116 DOT 3 or SAE J1703)
1) Between MIN and MAX (should be near or at max with fresh pads)

Power steering fluid (Automatic transmission fluid DEXRON® II or III)
1) Between min and max (cold and hot lines provided)
2) Cold - not driven in last 5 hours (50-85 degF fluid temp)
3) Hot - driven 50 mph for 20 mins (140-175 degF fluid temp)

Clutch fluid (FMVSS No. 116 DOT 3 or SAE J1703)

Rotate tires - every 5k or 6 mo
Factory Service Manual Doc ID: RM00000170W00SX

Front to back/back to front on each side
Lug nut torque - 83 lb-ft (21mm)
Check torque ~1000 miles after rotating

Replace engine oil and filter - every 10k or 12 mo (severe: 5k or 6 mo)

Torque specs:
Oil pan drain plug - 30 lb-ft (14mm)
Oil filter cap - 216 lb-in/18 lb-ft (

$18 TOY640 Assenmacher Specialty Tools TOY 640 Oil Filter Socket Wrench for Toyota/Lexus

TOY640 with 15/16" or 24mm socket)
Oil filter drain plug - 120 lb-in/10 lb-ft (3/8" square drive)
No. 1 engine under cover sub-assembly - 22 lb-ft (12mm)
No. 2 engine under cover sub-assembly (off-roads) - 22 lb-ft (12mm)

Parts:
Oil - 6.1-6.2 qts 0W-20 ILSAC GF-5 oil - Toyota part # 00279-0WQTE-01
Oil pan drain plug gasket - Toyota part #

$11 90430-12031 Genuine Toyota - Oil Drain Plug Gaskets (QTY10)

90430-12031
Oil filter element kit - Toyota part #

$47 04152-YZZA1 by Toyota

04152-YZZA1

Special tools:

$18 Assenmacher Specialty Tools TOY 640 Oil Filter Socket Wrench for Toyota/Lexus

AST TOY640 filter wrench (or Toyota SST 09228-06501)
5/8” ID tubing (for oil filter drain pipe)

Tips:
1) Requires removing skid(s) for access.
2) Oil filter has permanent housing, oil filter element kit includes new filter cartridge, 2 new gaskets, and the temporary oil filter drain pipe.
3) Hose for oil filter drain pipe (if used) should be 5/8” ID (15 mm). About $1 at Lowe’s in the plumbing section for clear vinyl tubing. Can help with splashing.
4) Proper torque of the oil filter cap and oil filter drain plug should help prevent the cap coming off before the drain plug on the next change, which can be a lot cleaner.
5) When you remove the filter drain plug, give it a little impact. If you're too smooth, the plug and housing will try and move together.
6) https://www.tacomaworld.com/threads/oil-change-checklist-service-record.462476/ by @RichVT

Lubricate propeller shaft - every 15k or 18 mo (severe: 5k or 6 mo)

Parts:
Spider grease -

$14 Mobil 1 Synthetic Grease, Auto, 12.5 oz.

Lithium base chassis grease NLGI No. 2

Special tools:

$55 Lincoln 1134 Pistol Grip Grease Gun with 18" Whip Flex Hose and Coupler, 6" Rigid Extension, 7500 PSI, Premium Dual Lip Follower, Variable Stroke, Jam-Proof Toggle, Filler Air Bleeder Combo

Grease gun w/ pistol grip and flexible hose for zerk fittings

Tips:
1) Spiders should be greased until fresh grease purges from all 4 seals. Should purge somewhat evenly, or there may be a problem
2) I would not attempt to lube center support bearing. I suspect it is sealed and is meant never to be self-serviced.
3) Only 4wd's have zerks, won't find any on a 2wd.

Re-torque propeller shaft bolts - every 15k or 18 mo (severe: 5k or 6 mo)

Torque specs:
U-joint bolts - 65 lb-ft (14mm/17mm)
Center support bearing - 27 lb-ft (be careful, if it was loose, may need realignment)

Tips:
1) You will need 14mm and 17mm box ends or flarenuts for the u-joint flanges, sockets won't fit
2) The flanges at the transfer case have a 17mm bolt head with a 14mm nut
3) Flanges at the diffs have a 14mm bolt with 14mm nut
4) Recommend a box-end or flarenut crowfoot on your torque wrench, but don't forget to lower your torque setting due to the longer torque arm. Here's a calculator: http://www.cncexpo.com/TorqueAdapter.aspx
5) Will have to remove heat shield at rear of xfer case (12mm)
6) Thanks to @maccus for the detailed info here

Re-torque leaf spring u-bolts - forum recommended

Torque spec:
52 lb-ft (19mm)

Replace cabin air filter - every 20k or 24 mo

Parts:
Filter - Toyota part # 88508-01010 standard filter
Or
Filter - Toyota part # 88508-04010 deodorant filter (surprisingly cheaper)

Tips:
If you don't know how, it's in your glovebox owner's manual

Replace engine air filter - every 20k or 24 mo

Parts:
Filter - Toyota part # 17801-0P100

Tips:
1) Easy job, but don't mess it up. Make sure there's no holes/tears in your new filter. Make sure everything's clean before you open up the box and remove filter. And make sure you have a good mating/seal around entire edge of the filter.

Front brakes - every 5k or 6 mo for visual; every 30k or 36 mo for measurements

Torque specs:
Brake caliper mounting bolts - 91 lb-ft (??mm)

Service Specs:
Pad min thickness: 1.0 mm
Rotor min thickness: 26.0 mm
Max rotor runout: 0.05 mm

Parts:
Rotors - Toyota part #

$90 43512-04052 Toyota Genuine Parts - Rotor, Brake Fr (43512-04052)

43512-04052
Pads - Toyota part #

$98 04465-04090 Toyota Genuine Parts - Pad Kit, Disc Brake (04465-04090)

04465-04090

Tips:
1) Measure runout 10 mm from outer edge of rotor; rotor should be installed with all 6 lug nuts torqued to 83 lb-ft when checking
2) If runout > max, check bearing play and axle hub runout normal before replacing rotors
3) If rotor stuck on hub, use an M8-1.25 bolt in holes on rotors to break it free
4) Install new rotors in position with least amount of runout

Rear brakes - every 5k or 6 mo for visual; every 30k or 36 mo for measurements

Service specs:
Drum max diameter - 10.08 in
Shoe min thickness - 1.0 mm

Replace differential oil - inspect every 15k or 18 mo (severe: replace every 15k or 18 mo)

Torque specs:
Rear diff drain plug - 36 lb-ft (24mm or 15/16")
Rear diff fill plug - 36 lb-ft (24mm or 15/16")
Front diff drain plug - 48 lb-ft (10mm hex)
Front diff fill plug - 29 lb-ft (10mm hex)
No. 2 engine under cover assembly - 22 lb-ft (12mm)

Parts:
Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent - Toyota part #

$48 08885-02506 GL-5 75W-85 Differential Gear Oil

08885-02506
Front - 1.6 qts; Rear - 3.1-4.2 qts (varies with model)
Rear drain plug gasket - Toyota part #

$14 12157-10010 Toyota Oil Drain Plug Crushable Steel Gaskets Set of 10 OEM 12157-10010

12157-10010
Rear fill plug gasket - Toyota part # 12157-10010
Front drain plug gasket - Toyota part #

$3 90430-24003 Front Differential Drain Plug Gasket

90430-24003
Front fill plug gasket - Toyota part # 12157-10010

Tips:
1) Perform with vehicle level
2) Ensure you can remove fill plug before draining
3) Proper level should be within 5 mm of bottom of fill plug opening
4) Re-check level after driving
5) Save new fill plug washer until final check
6) Will need to remove skid plate and may need bottle pump for front
7)

$12 GENUINE TOYOTA GASKET KIT FOR TRANSFER AND DIFFERENTIAL SERVICE

Diff and xfer case gasket kit
8) 3rd Gen Differential and Manual Transmission (6MT) Fluid Change by @Omar RVA
9) https://www.youtube.com/watch?v=VYXCfdGWto8 by @EB Group
10) https://www.youtube.com/watch?v=BW8b3odXVC8 by @EB Group

Replace transfer case oil - inspect every 30k or 36 mo (severe: replace every 30k or 36 mo)

Torque specs:
Drain plug - 27 lb-ft (24mm or 15/16")
Fill plug - 27 lb-ft (24mm or 15/16")

Parts:
1.1 qts SAE 75W Toyota Genuine Transfer gear oil LF or equivalent - Toyota part #

$94 08885-81080 Toyota Genuine Transfer Case Gear Oil LF 75W 1 Litre 08885-81080

08885-81080
Drain plug gasket - Toyota part # 90430-A0003
Fill plug gasket - Toyota part # 90430-A0003

Tips:
1) Ensure you can remove fill plug before draining
2) After filling, leave plug out and let sit ~5 minutes and re-check, add if necessary
3) Diff and xfer case gasket kit

Manual transmission oil - inspect every 30k or 36 mo (severe: replace every 30k or 36 mo)

Torque specs:
Drain plug - 27 lb-ft (24mm or 15/16")
Fill plug - 27 lb-ft (24mm or 15/16")

Parts:
Toyota Genuine Manual Transmission Gear Oil GL-3 (GL-4) or equivalent, SAE

$29 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75W-90
4 cyl - 2.3 qts, 6 cyl - 2.6 qts
Drain plug gasket - Toyota part # ??
Fill plug gasket - Toyota part # ??

Tips:
1) Perform with vehicle level
2) Ensure you can remove fill plug before draining
3) Proper level should be within 5 mm of bottom of fill plug opening
4) 3rd Gen Differential and Manual Transmission (6MT) Fluid Change by @Omar RVA
5) https://www.youtube.com/watch?v=YXbhD67UFTo by @EB Group

Replace automatic transmission fluid - inspect every 30k or 36 mo (severe: replace every 60k or 72 mo)

Torque specs:
Drain plug - 180 lb-in/15 lb-ft (14mm)
Overflow plug - 180 lb-in/15 lb-ft (5mm hex)
Fill plug - 29 lb-ft (24mm or 15/16")

Parts:
Toyota ATF WS fluid - Toyota part #

$79 00289-ATFWS Automatic Transmission Fluid, 192 Ounces, 6 Pack

00289-ATFWS
Drain plug gasket - Toyota part #

$7 35178-30010

35178-30010
Overflow plug gasket - Toyota part # 35178-30010
Fill plug gasket - Toyota part # 90301-15004

Special tools:
Toyota SST 09843-18040 (basically you just need a wire to jumper two OBD ports)
Bottle pump (to use for filling)

Tips:
1) https://www.tacomaworld.com/threads/3rd-gen-automatic-transmission-fluid-level-check-diy.547455/
2) Qty of fluid will depend on what you do. Per the TIS repair manual, it directs 3 drain/refill/circulates for a replacement, so it will probably be somewhere between 10-12 quarts.

Replace engine coolant - inspect every 15k or 18 mo (replace at 100k/120 mo and every 50k/60 mo thereafter)
Factory Service Manual Doc ID: RM0000017DS053X

Torque specs:
NO. 1 Engine Under Cover Sub-Assembly: 22 lb-ft
NO. 2 Engine Under Cover Sub-Assembly: 22 lb-ft (w/ Off Road Package)
Radiator Drain Cock: Hand tight
Cylinder Block Drain Cock: 9 lb-ft

Parts:
9.1-11.1 qts Toyota SLLC - Toyota part # 00272-SLLC2 (50/50 pre-diluted, Canada is 55/45). Qty depends on model, see manual.
Radiator cap - Toyota part # 16401-31830

Tips:
1) Be careful here, there's a special sequence to fill the system and remove all the voids without damaging or overheating anything

Replace spark plugs - Replace at 60,000 or 72 months and every 60,000/72 months thereafter.
Factory Service Manual Doc ID: RM000000SKC05EX - Removal
Factory Service Manual Doc ID: RM000000SKA05HX - Installation

Torque Specs:
Spark Plug - 13 lb-ft

Parts:
Spark Plugs - Denso part # FK20HBR8
5/8" spark plug socket. I use GearWrench part # 80546

Tips:
Electrode gap for new spark plug - 0.7 to 0.8 mm (0.0276 to 0.0315 in.)
Maximum electrode gap for used spark plug - 1.1 mm (0.0433 in.)
Factory service manual calls for removal of the intake and wiring harness, but the job can be done without this step. See here - https://www.tacomaworld.com/threads/2016-tacoma-spark-plug-replacement.554468/
Click to expand...

This is such a great post!! I reference it several times a month!

PacotheTaco17 · Nov 23, 2020

tacocart762 said: ↑

This is such a great post!! I reference it several times a month!
Click to expand...

Agreed. Thank you @Amanelot , I just crossed the 100k mile mark on my '17 and this has been, and will continue to be an invaluable resource along the way!

Eddie1958 · Nov 26, 2020

I need to order cabin and engine air filters where is the best place online now.

tacocart762 · Nov 27, 2020

Eddie1958 said: ↑

I need to order cabin and engine air filters where is the best place online now.
Click to expand...

I just bought a Wix from Amazon

MGMSangTaco · Nov 27, 2020

I’m an idiot and yanked these 3 wires by accident while changing the spark plugs. Am I in over my head or you think I can fix this? I am pretty good with electrical but don’t want to mess anything up working around the engine. Also anyone got the correct order of these?

Amanelot · Nov 27, 2020

MGMSangTaco said: ↑

I’m an idiot and yanked these 3 wires by accident while changing the spark plugs. Am I in over my head or you think I can fix this? I am pretty good with electrical but don’t want to mess anything up working around the engine. Also anyone got the correct order of these?

Click to expand...

I would order a new plug, and splice it in

MGMSangTaco · Nov 27, 2020

Amanelot[OP] said: ↑

I would order a new plug, and splice it in
Click to expand...

That's what I was thinking, thanks. May try to put it back together first. Any chance smeone can snap a picture of the order of the wires that go into here? they are 3 different colors

MGMSangTaco · Nov 27, 2020

MGMSangTaco said: ↑

That's what I was thinking, thanks. Do you know what part # that would be by chance? I am terrible at finding them

Heres a zoomed out pic of passenger side
Click to expand...

Looking like part #90980-12353 aka camshaft sensor

tacocart762 · Nov 28, 2020

MGMSangTaco said: ↑

Looking like part #90980-12353 aka camshaft sensor
Click to expand...

you still need the pic?

MGMSangTaco · Nov 28, 2020

tacocart762 said: ↑

you still need the pic?
Click to expand...

I got it from another member thanks though man!

tacocart762 · Nov 28, 2020

MGMSangTaco said: ↑

I got it from another member thanks though man!
Click to expand...

NP

Bertiemang · Nov 28, 2020

Does anyone have recommendations on where to troubleshoot both low beams going out? I pulled out one of them and it's not burnt out. Should I check the fuse box next?

ihatemytruck · Dec 8, 2020

Hiker46 said: ↑

Last spring I did the auto tranny drain and fill. Replaced around 3 quarts of the ATF. Tried to do it again and found that the 24 mm socket would slip off the fill plug. The hex head of the plug isn't very tall and I think my socket doesn't have much bite due to the bevel. Is there a special socket or wrench that folks use? Or should I grind down the end of the socket to remove the bevel?
Thanks, Tim
Click to expand...

What part number did you use for the fill plug gasket? Thanks.

Log in or Sign up

Welcome to Tacoma World!

3rd Gen DIY maintenance quick reference

#841
jerkwithkeyboard Well-Known Member

#842
Amanelot [OP] Member

#843
DAS Taco Well-Known Member

#844
Anton338 Ill-Known Member

#845
Amanelot [OP] Member

#846
Hiker46 Well-Known Member

#847
sicki Well-Known Member

#848
tacocart762 Well-Known Member

#849
PacotheTaco17 Shake 'n Bake

#850
Eddie1958 Well-Known Member

#851
tacocart762 Well-Known Member

#852
MGMSangTaco Colorado Toyota Tuning

#853
Amanelot [OP] Member

#854
MGMSangTaco Colorado Toyota Tuning

#855
MGMSangTaco Colorado Toyota Tuning

#856
tacocart762 Well-Known Member

#857
MGMSangTaco Colorado Toyota Tuning

#858
tacocart762 Well-Known Member

#859
Bertiemang Active Member

#860
ihatemytruck Smartass

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

3rd Gen DIY maintenance quick reference

#841 jerkwithkeyboard Well-Known Member

#842 Amanelot [OP] Member

#843 DAS Taco Well-Known Member

#844 Anton338 Ill-Known Member

#845 Amanelot [OP] Member

#846 Hiker46 Well-Known Member

#847 sicki Well-Known Member

#848 tacocart762 Well-Known Member

#849 PacotheTaco17 Shake 'n Bake

#850 Eddie1958 Well-Known Member

#851 tacocart762 Well-Known Member

#852 MGMSangTaco Colorado Toyota Tuning

#853 Amanelot [OP] Member

#854 MGMSangTaco Colorado Toyota Tuning

#855 MGMSangTaco Colorado Toyota Tuning

#856 tacocart762 Well-Known Member

#857 MGMSangTaco Colorado Toyota Tuning

#858 tacocart762 Well-Known Member

#859 Bertiemang Active Member

#860 ihatemytruck Smartass

Products Discussed in Entire Site Forum: 3rd Gen. Tacomas (2016-2023) Thread: 3rd Gen DIY maintenance quick reference

#841
jerkwithkeyboard Well-Known Member

#842
Amanelot [OP] Member

#843
DAS Taco Well-Known Member

#844
Anton338 Ill-Known Member

#845
Amanelot [OP] Member

#846
Hiker46 Well-Known Member

#847
sicki Well-Known Member

#848
tacocart762 Well-Known Member

#849
PacotheTaco17 Shake 'n Bake

#850
Eddie1958 Well-Known Member

#851
tacocart762 Well-Known Member

#852
MGMSangTaco Colorado Toyota Tuning

#853
Amanelot [OP] Member

#854
MGMSangTaco Colorado Toyota Tuning

#855
MGMSangTaco Colorado Toyota Tuning

#856
tacocart762 Well-Known Member

#857
MGMSangTaco Colorado Toyota Tuning

#858
tacocart762 Well-Known Member

#859
Bertiemang Active Member

#860
ihatemytruck Smartass

Products Discussed in