What Have You Done To Your 3rd Gen Today?

Well the instructions finally came through online , Simple install works great with the stock key fob . Push lock button 3 times , park lights come on , truck starts . walk up to truck click unlock get in insert key 2 clicks to ign. on position step on brake and drive away ! Shuts off after 15 min. run time unless key takes over .

 

many issues with it throwing any warnings?

 

So far no warning light. I haven't been on the freeway really since then to try the cruise but the crash warning still works. Some idiot slammed on their brakes and that got tested.
Edit:
Just took a short drive on the interstate, no issues with adaptive cruise.

 

Installed a tailgate mat, after a close call with kissing the pavement.

 

I made a $35 tailgate cutting board/table insert out of HDPE marine board. It has options to be reconfigured as needed. Made to fit in my chuck box:

 

Added BAMF HF Hangers and HD Shackles. These things are beefy.

 

Some of them you can reach in from the bottom to pinch with long nose pliers. That and lots of prying with two plastic trim tools did the trick for me... in the summer. I avoid doing plastic work below 60F.

You're more likely to break the chrome caps because they're brittle.

 

Got to be something on YouTube to help you out, but sometimes taking a break helps.

 

And worth the wait. That rig is stunning.
Zim

 

Front Bilstein 6112's installed


Rear 5160's installed


Looking nice and level now.

 

I need to do this myself, hopefully not to tough of a job.

 

Finally got around to putting my replacement bedside decal on since the repair work on my truck was finished. Thanks @CBoy808

 

I believe that the 2021 seats have been re-designed. That 10-way seat you have is witchcraft.

 

That's awesome!! I totally agree, best gift ever from your son.

 

I did watch a video first. I got all the plastic pins out. I just got frustrated with the tabs that you have to release that are under the step pad. Maybe I can watch a few more videos by someone else and get a better idea. There are loads of tacoma videos on YouTube.

 

added the door handle lights, very easy, one screw and two connectors per handle.

 

Well it was in the low 50s today. There isn't likely many days over 60 till spring. Maybe I should just put them on a shelf for now.

 

It is a lot less hassle if you remove the whole bumper rather than trying to maneuver inside the bumper to remove the caps.
https://www.tacomaworld.com/threads/3rd-gen-rear-bumper-removal.459863/

 

Mounted Pelican Storm case. Thinking of another one on the passenger side down the road. Great for storing Misc Gear and securing them with a couple padlocks

 

Not a mod for the truck but for your hands. I can put $200 in grocery's in 2 of these totes (lots of meat lol). They fold up, stow really good. Great for camping. And you can open a phucking door without 10 walmart bags on both hands.
Zim