Will 33s fit???

Yea I know there are lots of threads out there. I've read so many my head is spinning. I've read and been told so many different things, I'm not sure what to believe. I have a 2020 DCLB Offroad. I put 265/75/16 on the stock OR wheel, then I decided to lifted it. I put Bilstein 6112s up front set to 4/3 which gave a little over an inch of lift. I put 5100 in the rear, because it was taking forever to get 5160s, and an 1 1/2" AAL. My truck is going back next week to reset the front higher. Having it put to 5/4 on the settings and adding Camburg UCAs. 4WP says I can fit 285/70/17s at that point with the right offset wheel. I have been told by others I will need to do a CMC, which I really don"t want to do. I'd rather stay with the 265/75/16 then do a CMC. I'm sure I'd have to do a little plastic trimming with the 285, which I'm ok with. Any advice would be helpful. Please don't tell me to go read more. Been there done that. Need some real world help. I'll basically be at 1 1/2" lift all the way around with UCAs. If anyone is close to this with 285s, pics would be awesome. Thanks in advance.

 

Offset man, that's probably the most critical part of making 33's fit.

 

Lift will not prevent rubbing. It only reduces the frequency of rubbing. So don’t factor that into if you’ll fit them or not. Based on how much you’ve read you know that.

What wheel offset do you plan to have?

 

This is why I have skinny's but I do plan on a suspension upgrade in the near future! Think about the old jeeps in WWI, WWII etc......they all ran skinny's. Maybe they knew something.

 

Check out the tires on strikers and MRAP's.

 

I'm a Goggle Freak but help a brother out with some additional info?

 

Go with with tall skinnies (eg 255/85r16) if you want 33” tires that don’t rub. Otherwise, trim, trim, trim.

 

regular stryker are a 395/85/20

 

Even today, our up armored land cruises and hilux overseas run skinny tires.

 

It’s Costs to floss my Homie!!
That’s why I stuck to 32’s

 

Just get some 275/70 Wildpeaks and enjoy life.

 

Looking good

 

I fucking love this truck. Put a SSO bumper on it last week. Need a new pic.

 

Not Sure trying to figure that out still Thinking zero offset.

 

Yea I have been looking at the skinny's as well.

 

I hear ya. I saw some 275/70/17 wildpeaks. They are a little bigger that my 265/75/16. Kinda that in between size that may not rub.

 

I just saw these on a truck at Lowes. They looked good!!

 

Your truck looks good. What size lift?

 

I have 285/70/17 and even after all the equipment, it’ll still rubs. There’s a Runnin4Taco youtube video about tire sizes and the very little trimming needed for you go with 33s. It helps a lot.

 

Do you take your truck offroad? Very minimal trimming would be required if not. I have a second gen and am at about 2.25 inches of lift in the front. If you lifted yours 1-1/2 inches its about the same as mine since 3rd gens come an inch higher from the factory. I have plastic trimming and cab mount chop but that's only because i do some harder off-roading with lots of articulation. You'd be fine with very minimal trimming and no cab mount chop if you don't do any hard off-roading. You will need some offset wheels or wheel spacers on the 285 to clear upper control arm and inner frame.