Ontario BS Thread

@weight may help too!

 

Yeah all good.

 

Damn drunk Canuckistikians (LCBO cam)

 

Jealous!

 

Ya man...chasing a ghost. Thanks dood

 

It was pretty slick on some of the hills. Didn’t take any photos other than the campfire in the dark since it was dark by the time got organized. Nothing exciting really, ut was nice to get the fresh air.

 

Heads up

@Shveet

$600 for fox 2.0’s woth 10k kms. Not terrible but always some wiggle room.

 

Oh, this is not bad. He had a chance to ride with me couple years ago at Ganaraska when we jumped with those shocks. They survived me, Eugene approved.

 

Have you checked other provinces? I noticed that Newfoundland Liquor has it in stock. Might be worth a TW express.

 

Tw booze train! This is epic! I love this club for this reason. No matter how far, we will deliver your stuff as long as we can use our trucks and talk trucks!

I love it!

 

Thanks for the heads up. is that a decent price? i've not looked into Fox stuff or their prices. just know the name "fox 2.0". it's the equivalent of a billy 6112 right?

 

Would have to look at the specifics when it comes to shaft size and what not. Think a full 2.0 kit is roughly 1200+ tax. The 2.0s are also full aluminum. Only good for upwards of 2” of lift and you can’t really put heavier springs. Depending on future plans that may be a deal breaker.

 

Billy 6112 is 60mm = 2.4". Billy 5100 is 46mm = 1.8". Fox 2.0" would be somewhere in between, but has a threaded adjuster so you can adjust the preload without a spring compressor.

Single new Fox 2.0" is $620-$660 + tax e.g.
https://www.4wheelparts.ca/p/fox-2-...over-ifp-shock-985-02-002/_/R-BKTK-985-02-002
https://www.motorwise.ca/auto/d/fsx...ormance-series-coil-over-ifp-shock-985-02-002

 

It’s good, get it, it’ll work.





Found video of our next meet and greet.

https://youtu.be/QBEUtjwjbEM

 

Ghost riders.... very nice

 

well i'd only go the max 2 inches or so anyways. i don't see a reason to go above that with that i have.
in regards of the actual kit - what's in it? UCAs or something or is the kit all 4 corners?
in regards of heavier springs, are they heavier than the stock OR ones? if so, then that's fine. i dont have a reference point

not sure what any of the measurements mean in this.

so essentially it's 1/2 price i assume?

 

i love this commercial.
i can see us doing this unironically.

 

This is one awesome build... thought I'd share
https://www.youtube.com/watch?v=kEAvS81eruI

 

The full kit is front and rear shocks. Mind you, fox 2.0 rear shocks are roughly $200 each, so the coilovers account for a large sum of that price.

 

The measurements are piston diameter. As you've seen, most aftermarket coilovers for the Taco are 2.0" or 2.5" diameter. Bilstein, being European, defaults to metric sizes, 60mm for 6112, 46mm for 5100. In general, bigger piston -> more fluid -> more heat capacity -> greater endurance before the shock fades on e.g. washboard surfaces. Obviously how the shock feels will depend on the shock's specific valve design.

Yes the Kijiji set is basically 1/2 price compared to current new prices.