2021 taco trd switch pro setup?

hi i had a 2018 taco until a drunk driver totaled it, i just got the new 2021 taco and i see it has a lot of new switches. i got my switch pro back and want to us in on my new truck but dont see any places i put it. i had it on the left side above the bed light switch but toyota had to redesign that spot and put the 3d camera view and traction control buttons there. does anyone know if someone makes a new plate for the buttons so i can put my switch pro there? im not looking to cut up the truck.

 

https://sdhqoffroad.com/products/16...a-sdhq-built-switch-pros-sp-9100-keypad-mount

 

here is another option if you wanted integrated.
https://caliraisedoffroad.com/produ...-power-panel-with-concealed-mounting-hardware

 

If its anything like 2020, I used a MESO panel.

 

The cali raised wouldn't work. With the new 2021 tacoma they put the traction control button and 360 degree view camera button there . I think the SDHQ would work the best. Gotta love how toyota changed everything around.

 

How about for under the hood

https://www.tacomaworld.com/threads/socal-switch-pros-installs.656005/

 

I made the panels for CALIRAISED. I can literally make any configuration for any year.

 

I picked up a sunglass holder panel (6MT) but really like the side pocket version, looks awesome.

 

Awesome can you make one for my truck. I attached a picture of the panel

 

@Dmanfp89 Looks like you could literally use the same panel I have from Meso. Don’t see anything different with yours as far as switch types.

 

@MESO

 

All those different sized switches is maddening

 

I control the madness

Yours would be the exact one @mdelosrey posted. All you have to do is move traction control down.

Easy, I make any configuration you can throw at me.

 

Bump. Looking for this panel, too.

 

You don't need any mounts. I was able to mount mine with the supplied hardware.

Just bend these brackets a little

Remove the pocket and attach to the edges

Done. Yes, it's not flush like the other mounts, but for $free.99, I don't mind it not being flush

 

https://caliraisedoffroad.com/colle...acoma-switch-pro-mount?variant=33430042149002

Meso actually posted on his IG (I think yesterday?) that a shipment of these was sent to Caliraised.

 

I’d buy one that fit the factory switches of the 2021 and switch pro

 

I got mine within the last few months.
@MESO does batches, so subscribe to notifications so you will know when it comes back in stock. And he can configure it the way you want it, which is nice.

 

That's how mine was as well. If you want to save some time, go ahead and run the wires through your firewall so all you'll need to do is just connect it up.
Maybe even get a hacksaw or Dremel and go ahead and cut around where you need to install the new plate from MESO. Don't worry, your OEM faceplate should still fit (I think, as long as you don't have the cubby).

I might even recommend you do the install in the engine bay, less the battery connection to the SP. It was about a half day install for myself.

 

Where are you located? I have an extra panel available before you buy yours. Do you have the 360 degree camera?