What Have You Done To Your 3rd Gen Today?

That’s the great thing about plasti dip compared to paint. When you spray it you tape it off the best you can but whatever over spray you do get, it wipes right off with a micro fiber rag.

 

If you haven’t already done so, I’d email support and see if they’d just send them. I emailed when it was first posted but prior to being on site. I already had communication with them about issues (the screws being 1) at the beginning of this yr so I asked to get sent screws to my previous complaint. Supposedly on the way but we will see

 

Finally stopped raining for a minute so I installed my new DD SS3 fogs. Love these!

 

I did exactly what you said and found the canopy wires went through the frame quite nicely, i followed them through to a grommet under the driver seat. Thanks for replying with this because I wouldnt have thought to even take off the rear break light!

 

Interested in the bed decal. Link please. I have been looking for an old school replacement.

 

Bedside decals came from here:
https://www.etsy.com/shop/JKSIGN?ca...FXZ0jduw&eaid=1021272070015&x_eaid=8839d435ad
Everything else came from Taco Vinyl

 

Glad it worked out. That’s what’s so awesome about TW!

 

Only bad part is it looks horrible 99% of the time

 

bought it on ebay. $75

 

https://parts.toyota.com/p/Toyota_2...d-Graphics---Black/69527492/PT9293516020.html

Just put on this hood graphic. Love the subtlety on the dark gray, was worried it wouldn’t look as good as it did in my head

 

Finally got my total tail stage 1 kit in the mail and couldn’t be more happy with the look.

New on the left and original on the right. The amber turn signal is sweet.

The reverse lights are so bright I swear you could use them as headlights.

 

Looking at the second photo, i poked a hole just big enough for the cable to pop out of through the rain guard plastic piece thing. Lighting is bad but I've circled it here in red.


Originally i had my antenna mounted on my bed rack but it got in the way when i opened up my RTT and used the rain cover/windows. For that install I had run the wire from the CB Radio which is mounted in the driver side by the pedals through a floor grommet under the front driver side mat. Then jsut zip tied it along the frame to the back of the truck to the bed rack.

Since moving it I brought it all back out and now fed it through a grommet under the front passenger side mat. Then straight up to where it is now. Used some zip ties to clean up the extra cable and secure it to the body.

 

Nice! I think the scoop and the door decals are the best

 

looks awesome! i've had mine in a box for a week without any time to install them between crappy weather and work.

 

Felt so much safer driving I70 in CO in a blizzard yesterday with these. I could see people following me slowing down from so far back, can’t say the same about stock.

 

Added KTJO rear window one touch. Works very well.

 

Finished installing SP 9100 and power trays.

Started installing KC cyclone rock lights. I'm using them as camping/work lights so I'm not mounting them in the wheel wells.

Cleaning up a bunch of other wiring

 

Raptor taillights courtesy of @CaliRaisedLed

 

I installed mine about a month ago and I couldn't be happier with the mod. They say the stage 2s are even brighter....jesus lol

 

And there will be a newer version of the stage 2 that will be even brighter.

Some people have already updated their Stage 2 with extreme bulbs.