KB Voodoo with a Truck Cover USA Roll Cover

Hey all!

I have been trolling the internet to see if the KB Vooodoo Max Modulars work with the American Roll Cover by TC USA. I couldn't find anything definitive on the KB Site or TW. SO I took a very expensive plunge to test it out and I'm happy to say it mostly works!

The rails of the Roll Cover are slightly pushed up and don't PERFECTLY align with the factory rails so it's askew. This happens due to the KB Voodoo Tonneau Adapters that you need pushing up on the rigid TC USA Rails. (Converted from BakFlip MX4 to TC USA). I do need to adjust the rails and canister slightly more towards the tail to close up the gap between the end of the cover and the tailgate when closed.

It works beautifully and I love it so far! Above the racks is a James Baroud and brother it's great!

I'm happy to answer questions on any parts to save some people heartache and money!

 

Looks good, thanks for sharing the info!

 

@HafaAdaiTaco I got a notification for a photo but I don't see your post on this thread. Either way, here is a profile photo of the ass end!


I bought some 1"x2" 80/20 to lift up the JB so the racks wouldn't scratch the shell too much. It also gives me extra wiggle room to move the JB forward more towards the cab. If I put the tailgate down, the JB sticks out and lines up mostly with the end of the down tailgate for reference.

I

 

What height is that rack? 14”

 

Thanks for the pic. I found an you posted on a separate thread. In the market for this same tent. I have the Yakima Overhaul setup, and curious about how far back the tent would sit if I choose to not have it hang over the cab. This pic is exactly what I needed. Again, thanks!

 

@OldSkoolArcher it is the 14" Max Modular but I also have 2inches added with the tonneau adapters (regular, nit bakflip)

 

@HafaAdaiTaco I have to mention that this is the James Baroud Evasion XXL! Not the regular sized one which makes a significant difference!

 

That was also helpful. I was worries the standard was going to extend so far...sounds like I'll be fine with what I had in mind.