OVTune 3.5L Tacoma Supercharger and Twin Turbo Systems

Thanks!

 

For those curious, here is another mounting option.

https://www.cravenspeed.com/the-flexpod-gauge-mount-for-toyota-tacoma-2016-2020/

 

The 710 Mod strikes again!

 

I know this isn’t the Buy/sell area, but what better place. I bought the Vibrant Performance 2990 manual bead roller that comes in a case for $270 on Amazon, used it for 3 or 4 pipes, and now have no use for it. It comes with an ICT 5/8” billet weld on (ordered 2 by mistake) for all you passenger side valve cover vent needs. $200 shipped.

 

I would make sure you do some driving before you get rid of it. Just in case you have to adjust some lengths on pipes. I blew some piping apart on my first drive.

 

Did you bead everything?

Edit: but yah you may be right, back on sale in two weeks folks.

 

No I have carbon fiber but I had some sections that were a little short and popped apart.

 

Try hairspray, any kind seems to work well. At our boost targets, it should be more than enough. Also that way it’s less permanent vs gluing.

 

I'm good now. It was the very first drive I took. I cut some stuff a couple inches longer in those areas I haven't had any issues since. Good advice though.

 

Got my drivers side in today. Pretty slow progress but I chose to modify a few things.

Raised the fuse box about an inch to help with clearance. Used some threaded M6 stand offs.

 

Progress is progress!

 

I have a few of them boxed and ready to go, but to be honest I'm a little worried putting them in UPS hands right now. I cannot even believe how many packages UPS has lost and damaged from what we have shipped out the last 2-3 weeks.
Not to mention packages going to the wrong state entirely. Somehow all packages sent to Maryland ended up in Minnesota. etc.

I was thinking it might be good to send them after christmas, so next week, when the surge of packages are gone

 

Makes sense! I agree with this, let the delivery services get back to normal work loads.

 

Following i know where my second kidney is going

 

Where did the first go? Asking for a friend.

 

A fresh 2021 tacoma OR DBL Cab . I already have plans for my left nut to pay for the rest of my upgrades

 

Cool. Is that fire-sleeve I see around the harness?

 

Looks like it. I used a ton of this stuff, made life easy.

 

Thanks. Looks like it's sold in 4' increments and assume either the 5/8 or 1" is best for our installs. Which diameter would you recommend and how many linear feet did you use?