Passenger Door 12v DC charging port add.

Ground to any door bolt.
Working on opposite mating connector part# to P15.(P14 & P16 also same)
Fused Power terminal is female 090/2.3II type.

@daveeasa

 

So close to the dash port though, what’s the thinking of drilling a hole in a perfectly good piece of plastic when the OEM poutlet is in reach of the left hand?

 

For the rear passenger(REAR Left-hand)?

 

For rear passengers back of center console via 400w always on inverter mod and combo 110 / 12v w bezel. Cutting the back of the center console is pretty easy.

 

Something to keep in mind; pretty sure that dual usb is going to be quite a bit bigger in diameter than the circle you have drawn on the window roller upper piece. Probably won’t lease too much material on each side. Just something to think of.

 

You're stating that there is less than 2" on that door piece? There are so many choice usb in the market one could select. I won't do a drop down list.

 

Taking 12v DC to change it 120v AC to then place another converter to back to 12v DC and all this with barely 3 amps...I don't know...many have done it without even why they did it. It looks cool and it's blue?...

 

No. I’m saying that the size of your drawing doesn’t represent 2”. Maybe 1” at most. So, double the circle in your drawing that that will tell you how much is left.

Of course, that’s assuming the USB is 2”. If it’s less cool.

 

No,dos por uno. Can do straight 12v port on back of center console. Can do combo 12 and 110 at the same time and make it look nice. Better location, one spot serves the entire back row. And super easy to cut, no water concerns, easy access to wiring for add a fuse or piggyback or ...

 

1.46"...it's tiny in the pic

 

Ahhh. I see it now. Thanks for pointing it out.
Good luck!

 

Something about kids, feet and short wire to their Nintendo Switch...

 

Tell those damn crib midgets to stare out of the window like we had to! Hahaha

 

Do it right:

 

I think back of center console piece would be a perfect spot for a MESO mod. He sets up the injection mold and figures out the right curves to beat that sort of lame and overpriced bezel. Which I tried as hard as I could but still didn’t get to sit flush.

 

How did I get quoted beating a dead horse?

 

My kids are happy. That's all that matters

 

If the Forum had a counter for everyone that's added that particular single outlet we'd know, but even without the counter it's a lot.
Some would say a happy pet is much better than happy "kids". But then "pet" is so many things. And other peoples kids also.

Heat is your friend...