What Have You Done To Your 3rd Gen Today?

Eh, yah, but I like to support the local shop. I bought more than I needed and now I know I don't have to use Amazon or wait for shipping. But I get your meaning because you're totally right.

 

These are both great suggestions.

 

They absorb impact like a rubber bump stop, but way better. Makes it much smoother. They are valved to be progressive.

 

You can read up on those particular bump stops here: https://www.iconvehicledynamics.com...essories-05-up-tacoma-rear-hyd-bump-stop-kit/

• Absorbs additional impact energy over the OEM rubber bump stop and returns the axle in a more controlled manner

Locked install video is here:

 

I’d take that shit back

 

That's the shortest install video I've ever watched.

 

Who installed and how much? Any inside cab pics?

 

Link to the product please?

 

He linked it above.

https://www.iconvehicledynamics.com...essories-05-up-tacoma-rear-hyd-bump-stop-kit/

 

Nice. I hate the extraneous tick marks on those rings.

 

Purchased a multi-size pack of sandpaper , 320 to 80. The powder coating was fairly thick with a primmer coat under that, used a small electric hand sander and around and around...it takes a bit.


Removed bolts, started with the 80 corse and worked down to maybe 220, the higher grit makes it more smooth and shiny. This is my second set to work like this, had 17’s on my old Tacoma. I used a clear coat on the first set, but this set I’ve left bare, they still look great.

My old setup.

 

i like the look of that truck right there, really nice
285/75 16's
the silver lips on those Ray 10's is really nice too
are those the gunmetal Ray 10's?

 

5100s/ome 887 with a deaver single aal, spidertrax spacers, ecgs needle bearing swap, and OVtuned all done by @sibibuilt.

It feels like a completely different truck, and especially cause of the tune.

 

Wheelers Super Bump Flip Kit

 

How bad is the install? I've got a similar setup from archive garage on the bench. Need to get around to installing it.

 

These small things add up to a big, useful truck that won't get caught out, stranded, or rescued. Nice work man.
Zim

 

Has anyone ever installed the blue sea fuse box that has the 6 constant fuses? As in they’re always hot. Car can be off and whatever’s connected to those 6 will still be able to be turned on. Wondering if this will drain the cars battery, even if I add relays and switches to each of the 6 circuits.

 

Just the block itself won't. If there's nothing on, there's no draw.

 

Very easy install bro. Not bad at all

 

That's exactly what I did but in BBP.