What Have You Done To Your 2nd Gen Tacoma Today?

1st Phase of Chrome delete done

 

Notice a difference with the stainless lines?

 

I think the 33/10.5/16 would be awesome on our trucks. Its only .08 wider than a 265 yet be a true 33. To bad hardly anyone makes them.

 

They look cool, no pedal feel difference IMO. But they shouldn't get dry and blow out and they are a little longer so they should pull apart at full droop even if I upgrade to a better suspension setup later down the road.

 

Finally got all the salt washed off. Wont last long though

 

I've been on 255 on three different Toyotas thus far so my opinion might be a little bias. I've been off road where most are on 285/75R16 and never had any issues keeping up or doing the same lines.

Between 255s and 265s you are only losing 3/8" in width for a gain of almost 3" in height from the stock 265/70R16. Again I might be bias, but I'd give the 255s a go, or find someone local who is on 255s and make a decision from there.

 

Shit - better make that 48!!!

 

Got the Prinsu cap rack installed

 

we need pictures

 

Got the wheel alignment done after I installed lift and wheels and tires. was toe’d out on both sides, Everything is in the green now. Still have a slight rub on the mud flaps when turning sharp. I’ll give everything a couple months to settle in before I get it realigned and attempt to move the tires forward a bit more.

 

Following the process @Crom described I successfully reclassified my truck and no longer have to pay the "weight fee" of $80 per year. I filled out and printed the forms he mentions, brought them to DMV with my title, and received my new plates on the spot.

Registration went from $349 to $269.

Thanks @Crom

 

Bought an exhaust to replace the current one that is falling off the truck

 

What’d u get?

 

MBRP stainless turndown. Found a pretty good coupon code to make it the same price as the aluminized version so I pulled the trigger.

 

Woah. What is this process you speak
Of? I need in on this.

 

Tonight I will share the docs I and how I filled them out...

 

Added some hood pins and now she’s rock solid. Was a bit of a pita getting it all lined up but I’m glad it’s done. I had some cheap ones on my old hood but went with the name brand, made in merica this go around.


Quik-Latch QL-38-LP/BP Hood Pin...

$146 Quik-Latch QL-38-LP/BP Hood Pin Kit (Black Cerakote)

https://www.amazon.com/dp/B06XNJDGKZ?ref=ppx_pop_mob_ap_share

 

Not the best pictures just leaving work. Plan to take more next time I’m out somewhere worth taking pictures haha

 

What does this mean? Did you have the truck with Truck tags on it? Is that a requirement out your way? Both of those prices for registration is outrageous!

 

That’s crazy! I just renewed mine today and it was $102 and that was just because I have a special plate!