Charlotte, NC area: hate on OP, houses, boats & hoes

does it buy you the A/C machines too to properly evacuate, reoil, and recharge the system after the condenser is reinstalled when you are done?

 

Small garage minisplit can be had for about $1700-1800, for $100 more you can get on with a reversing valve so you can heat it too. Install could be done yourself if you have the tools but prob cheaper to install then have someone come and purge, fill and test the refrigerant lines if you've not done it before.

 

Lower, there are many diy ones you don't need ac tools for

 

Those new DIY plug and play systems are pretty neat. I'm impressed with them for what they are.

 

Truck goes to ECGS for them to look at front diff. Hopefully they can fix it tomorrow and I'll be ready to wheel again.

 

Drive it to a shop and pay a few hundred to have them recover and refill it?

 

Who wants to do a CMC fo me? I’ll pay you for your time and efforts

 

do you want it plated or left open?

 

I’d prefer it plated but if I can get it cut to clear I can plate it later.. 285’s barely hit

 

I've got some SOS plates if you need them, I thought I would need them but I don't rub with my 255s.

 

What you want to let them go for?
People wanting $60 for two damn plates are out of their minds I’ll just get a 12”x12” of 3/16 plate and cut my own.

 

I don't know where you've seen them for $60. I paid $20 for these and that's what I'll sell them for if you want them. Same price as you'd pay direct from SOS. $15+ $5 shipping.

 

3/16 would be too thiccc

believe the closest match would be 11ga.

 

Got pics of the 285's mounted?

 

Personally, I left mine open and just painted it. When I cut it open, it was completely full of mud and wet silt...probably would have rusted the frame overtime and never known until it was too late.

 

I do not, gets damn dark to early I’ll get one today

 

Are there any good tire shops around South End that you guys would recommend? I need to get my GX wheel/tires balanced...can't drive more than 60mph without feeling like I'm riding a Sybian.

 

Are you speaking from experience?

 

I have quickly looked around and thought I saw them for $60 somewhere. I’ll take them

 

I'm in Steele Creek by the Outlets. I'll dig them out of the garage, PM me.