What Have You Done To Your 3rd Gen Today?

Finished up my DIY cargo divider. Gave it a quick coat of primer. Need to wait for warmer weather for the final coat.

 

Shouldn't take that long to send that paper. Must be using media mail

 

Nice job

 

? Paper?

 

Installed the Rough Country Molle Bed Panel today on the passenger side.

Couldn’t find any reviews or posts about them, but figured I’d give it a shot. Overall the quality is better than expected and the price is right. Now I just wish I would’ve bought the driver side at the same time. I will say that if you’re mounting a shovel then I’d get shorter Velcro straps or some quick fist clamps.

 

I put in some $20 Amazon special Raptor lights, LEDs in the cab, LED reverse light, and a tray in the center console. Gave it a much needed wash too. I'll do a proper wire job when the switch panel/fuse block gets here and for $20 if they don't last then I'm not out much more than a case of beer.

 

I got a link on the main post, I don't know why but it appears that they don't show the multi terrain one. There might be other vendors that sell same stuff, I got mine from Amazon.ca but I saw them on AliExpress too...but it will take forever to get them.

 

How much did you spend on them out of curiosity? I have been making some panels and I am thinking of selling some to help fund some things for my truck.

 

The photo

 

I had to park next to my brother in McKinney while the wife was giving blood. He has a few more mods than me......

 

Installed some JDM Astars LED bulbs for the reverse lights.

Also the Vehicle OCD kit for the glovebox and center console.







Edit: The second rubber mat for the console topper was in the pocket and I placed it in there after I took the photo.

 

The bolts that secure it to the bed, are those already on the truck or were those included with the panel and you had to drill holes?

 

I paid $70 for the passenger side panel. Both driver and passenger side combo is $130.

 

No drilling required. It uses the factory bed rail bolts with a bracket and 3 supplied Allen bolts. Then it uses two of the factory bolts on the storage box. Here’s the step by step instructions. Hopefully that helps explain it. It’s not very clear on their website.

 

Just installed my BHLM assemblies. These were done by @no vtec 4me
The pics don't do them justice because it's dark out already, but DAMMIT THESE THINGS ARE BADASS!!!
My fogs are OEM black leds.
Kevin is an absolute PRO. Lights were packaged and shipped to me perfect! The housings look amazing. Can't even tell they were opened up. Had to locate and ship my stock housings to him because I have an SR, but if you have an OR, Sport, etc. He keeps stock cores around so you don't have to do what I did. If you're on the fence about BHLM or a chicken like me and don't want to do it yourself go hit Kevin up. He answered all my questions and he offers lots of other options. I went with a fairly basic set up. I am absolutely a satisfied customer!

 

Can’t find the MTSS selector. Any links?

Nice! Ordered the full set, we’ll see how it goes.

 

Installed RCI rear bumper while I’m on vacation. Really liking the way it fit. Still need to wire up the rear lights. Probably tackle that tomorrow.

 

Installed extra D ring tie downs in the bed that @ODSC1 turned me on too. Looking forward to tying down my next load!

 

That's a very nice looking bumper. As I look, I see a gap between the crown of the bumper and the tail light. Is that my imagination (photo angle) or is that something that would be anticipated?

I really like the bumper itself and it looks good on the machine.

They also have a nice looking bumper for the front as well.

 

Well, now I know where some of my stimulus money’s going.