1st Gen Lunchtable Thread - General Discussion

I've just been ordering the SuperTech gear oil from Wally World for the diffs, cheaper than anything else.

Transmission gets the good stuff

 

Mmm compressor swap out

 

Didn't need to use the axle seal on the passenger side but I've got driver side case I need it..



I just realized I have a replacement front diff drain plug; the stupid hex key one



As well as the axle and transfer case fill plugs...



Have several flat copper, aluminum, and crush washers that are used throughout the transfer case, diffs, and transmission.



Glad I bought all this and more for the Tacoma only to end up using it on the 4Runner.

 

I have a few cool ones in my room. The unsafe mine one I bought from a mining supply in Elko, NV. It’s made on a blank Nevada license plate which is cool.



Top one is from Mindanao, Philippines, bottom one is from the German state of Thuringia.

 

https://www.tirerack.com/tires/tire...55VR7CC2&vehicleSearch=false&fromCompare1=yes


were going to see how well these are.. going to pick them up in a week or 2 for the avalon.

 

Oh shit...

I helped answer some dudes question recently about their manual hubs axles.

The end is threaded to accept a bolt/washer combo and is used as a back up to the snap ring that holds the cv axle in place.

I just realized I own a pair of those very bolts even though I never planned on running them

 

Me

 

@Abeyancer

Since you have manual hubs, do you want a pair of snap rings (attaches at the wheel end of the cv axle), front diff drain plug (hex style), and pair of bolt/washers that are a back up to the snap rings?

 

Man you opening your own toyota parts department or something

 

QUIT STEPPING ON MY TOES!

 

I can only hope to have an extra frame like you do, or at least a Tacoma I don't drive

 

Fify

 

broski
i thought we were cool bro

 

We are

You're the last person that needs small Toyota parts though; probably get all this shit for free

 

i have 3 vidmar drawers full of just bolts and nuts... brand new toyota ones.


so yes.. i also have 2 2012 highlander remote starts. why? i dont know.

 

You can have the frame because danny boi taking forever

 

if it rolled i'd have it shipped....

 

Found something else..



Extra ball and detent spring for a manual hub. The ball bearing can fall out and get lost when taking apart the manual hub for a rebuild; had a spring break one time so I bought a replacement as well as an extra.

 

May take you up on that.

Looking for another house as we speak

 

Arizona?