AZ BS Thread 4²0

So its not bad waiting on your shaft extension...

 

Thanks

I just went under truck to get ready to install the modified exhaust route skids. Just noticed this where they did the reroute? Not sure what it is but looks to me like it should be connected. Possibly the muffler guy did it. Anyone confirm it needs to be connected?

 

Yep thats the spot. Well atleast I can have some entertainment. I wonder if the have midget dancers yet like I asked?!?! Do you know? Or have you been black balled?

 

Yup, not a problem.

 

Yes, needs to be connected. Looks like the hose is cracked, Might as well replace all the hose there you can reach while you're at it. That's the breather for the actuator housing.

 

@snowsk8air2 hey man.. LCAs are gonna be here tomorrow.. so thinking I'm gonna start tearing into the front end.. again. Going to replace both inner and outer tierods at the same time... Again. Used NAPA tierods last time I believe.. maaaaybe O'Reillys.. can't remember. Anyways.. wondering if you had any preference on stock tierod replacements. Might just pick up some OE ones and see if they last me until I can get that JD fab rack and ends setup.

 

There looks like a hose right there plug it

 

I believe I used moog ones when I replaced mine. At least I did for the outers since they were greaseable. And I’m remembering now that when I did my first rack swap it came with new oem inners and that’s the only time I changed those

 

Got ya. Cool, I appreciate it. I'll take a look around then. Maybe see what @BillDaCat8 can do? inner/outer tierods?

 

@BillDaCat8 can definitely hook you up with oem

 

Anyone need a center console divider? Paid $15 on Amazon then bought a console vault

free. Or if you are like me and don’t like taking free stuff , a couple beers

scottsdale located

 

Hey guys is box canyon doable stock? I've read that out there has one option section that is pretty technical but from what it seems, you can go around that. I'm thinking of doing box canyon starting down in Florence and finishing up out by 60.

 

I don't recall needing to do the CB since the 08. I don't think it's been done on the 15.

Are strip clubs even open with Rona?

 

Expect to do some damage in a few spots. Bring a friend with a strap or winch. Going down the waterfall would be easier than up.

 

A distinct possibility...problem is, secondary market is equally as inflated right now with many expecting/receiving close to retail for used outdoor products.

Bike parts/bikes are still in short demand, with vendors setting backorders for the next 180/360 days to attempt to play catch up.

Let me know if you still need help sourcing the pedals for your spin bike...might be able to get a lead on some product for you.

I mountain bike...a little.

Brown's Ranch/Pima~Dynamite area is great for beginners...buff single track with nice flow, however weekends are crowded, so get there early or late with lites. Chuckwagon up/down to Whiskey Bottle then back to the main TH via Latigo is a nice/easy 6 mile out n back to get things started...or kick some Strava and loop it three times for a little more practice.

Apache Wash TH off of East Sonoran Parkway is a cool spot, taking Ocotillo west from the main TH or Apache Wash Trail east and linking up with Badger Brawl/Cliff Walk/Esplanade can make a fun 10-12 mile day. Ocotillo west and back is fun too...lots of swoopy ups n downs with just a dash of climbing. If you really want to shake out your quads, give Sidewinder a spin once you've got your legs underneath you.

As others have said, Trailforks is your friend...enjoy the ride, fuel your stoke.

 

I should have clarified, they did end up having some SPD pedals. I'm also in no rush to get on a mountain bike right now, terrible time to end up in a ER...

 

Rear bumper coming out pretty good.



And laying them down nicely on the fuel carrier.


About 15 more feet of welding and then cleanup before powdercoat for mr @Atl-atl

 

Your welding is way better than mine. Got the wings on it today.

 

Looks good I just need them to make a stealth bumper for the wife’s 5th gen