What Have You Done To Your 3rd Gen Today?

Thank you, tells me what I need to know.

 

WTF= Welcome to Florida...Florida Man!!

 

I hit up a fellow TW member that had cut out the front console switch plate for the MESO switch plate mod. I paid him for shipping to send me the part that he had cut out. Then I cut out the ECT holder part that I needed with a hot knife, then cut the hole in the centre console with a hot knife as well and filed to fit.

I have an ECT button extension wire harness in the mail thx to a fellow TW member who is custom building them.

 

Those engine bay lights look really good!!!

 

They work thats for sure. They really aren't that hard to install. If you're like me, I'm still a bit of a noob for wiring stuff, it looks intimidating. But honestly, it took me about 30- 1 hr to install.

Hit up @mattgecko if you have questions. He answered mine.

 

Installed the same lights on my '16 and I agree 100%. It was a real PAIN. But it is a definite plus for the bed especially with a cover installed.

 

fifteen52's I think. very nice indeed

 

I looked at that too but on AliExpress for quite a bit less...that's where I get all my "TRD" knockoffs !...

 

Looks good, were the caps pricey ?, how about the install...how extensive was it ?, my caps got scars and could use replacement...unless your chrome are not damaged and we could perhaps make a deal...thanks

 

Found the unpainted caps from car parts.com for $40. Can of paint and clear was another $20. In my opinion the hardest part of the job was putting the clips back in on the upper sides of the caps. Besides that it takes 10 minutes to remove and install

 

I was “cool” all the way until I had to fish that wire loom over the gas tank. Then I damn near list it. Lol

 

Thanks for the info; I will look for someone who has cut theirs out.

 

Thanks

 

@MESO PRO SHIFTER BUTTONS?

 

Lots of us are waiting on those to be released again.

 

100% copied this very technical MOD from another user in this thread. I have no shame.

 

Will these work for non-auto climate control knobs?

 

My brother uploaded the wrong file to the CNC so thats why it says "USB" instead of "12V". I have a Viair 350C OBA kit,

$529 iceco jp40 portable refrigerator fridge freezer, 12V cooler refrigerator, 40 liters compact refrigerator with secop compressor, for car & home use, 0℉～50℉, DC 12/24V, AC 110/240V

iceco jp40 fridge, seaflo 33 series washdown pump, roof top tent, and firestone air bags on my 2020 trd or. The perfect companion for mountain biking trips

 

Nope, doing my own thing. I needed a spot for my Anytime Backup Camera switch so I'm relocation the ECT button near the pull brake and then going to tap into it to illuminate an LED in the TRD Pro shift knob.
The cap for the shift knob is at a laser cutting shop waiting to have the TRD lettered cut out.

 

Welcome to TW!