What Have You Done To Your 3rd Gen Today?

Awesome thanks so much for the tip. Last thing I want is to be without brakes on a trail.

 

Exactly. I was lucky, I was at work and was able to get right to the dealer and have it back by 4pm that day.

I think there was posts in the show off your power tray topic that had some ideas how to protect the harness.

https://www.tacomaworld.com/threads/show-off-your-aux-fuse-panels.308677/page-55#post-22674159

 

Bought one. This count.

 

@TopQuark

 

Took advantage of the balmy weather we had in the NE today and cleaned up my CB & Ham Radio wiring to my switch pro and then washed and waxed the truck. It needed it VERY bad.

 

I dont have enough posts yet to make a for sale thread but it is available

 

Prinsu for sale in Denver:

https://www.tacomaworld.com/threads/fs-prinsu-rack-with-all-the-fix’ns.703388/#post-24940797

 

Got my wheels and tires on today

 

Another one... heading back to Colorado this weekend and then road tripping for two weeks back to the PNW before I leave for AK. Rear seat delete and basic gear platform, which can lift to access storage underneath. Used 3/4in plywood so it’s sturdy. Cut it super tight, 55in x 24in. Perfect fit, might shape it a bit more later, right now both doors have to be open for the deck to hinge up all the way without scuffing the door panel. Might add some tie downs and maybe bedline or carpet it? Just playing with the idea for now!

 

Ha - work for APC? Great Lakes? Panduit?

 

I built a platform for my lab in my AC. I used some laminate flooring underlay and then covered in vinyl.
Then installed 2x colapsable brackets for stability.

 

Nicely done.

 

Close!!
Chatsworth Products

 

Enjoy your new truck!

 

So I hired on at a Surveyor that was using Autocad Land desk top, I think it was 10, lots of F key crap. Anyhow a few months later, someone hit the wrong key and Autocad called. Asked where we got the other 18 copies of the software the company was using. LMAO.....$65,000 later, we had the newest version, another lawsuit, and some mad company owners. I lasted 3 years and bailed in 07.
Zim

 

Installed the Victory4x4 molle panel on the passenger side before Christmas and finally received all the molle gear to install. Not sure if I need to put the one on the driver’s side, but I’m sure I could find other items to mount.

 

I like it, maybe need a Batman emblem on the grille instead of Toyota.
Much better than Meso bling!

 

The price you've found is good, but I've seen people here talking about a pair of anchors in the double digits so I like to mention the Fastenal d-rings as a choice. I wouldn't worry about any rated strength above say 500 lbs too much because I'd bet if you come close to a couple hundred lbs per you'll pull your bedrails off. Since I don't want to put too much tension on my stocker plastic anchors or the 3/8" eyebolts I have in the bedrails I've mounted two d-rings in the fore bedbolts. I either use them like normal or run chains between the fore and aft d-rings for multiple tie-down points.

Some of those t-slot anchors can get pricey too, so I use ground down 3/8" electrical spring nuts from HD like a lot of guys here. Like 5 for $5.

 

Tacomas forever 20 years apart