Eibach pro lift kit

Yeah I already had the ECGS in and had a little vibe. The shims fixed her right up.

 

IG: @thesaltyota

 

Setup? Tire size, wheels? Looks sweet man! What notch on the Eibach's?

 

Lowest notch, 17x8.5 -10 285/70, SPC UCA. 0 rub even in full articulation.

 

That's good to hear, I have SCS SR8's with same specs. I plan on getting Eibach's. Just not sure what tire size. But 285/70 is a good start. I would really like to go 285/75. I feel like I could clear with CMC and trimming. Not opposed to. Just have never had a lift kit, so I honestly don't know. I appreciate the info.

 

Glorious!

Anything in the rear?

 

Anybody run the Eibach kit on bottom notch with Icon RXT leaf pack? Before the install starts still not sure what to do with the rear... Option 2 provides 2.25" and Option 3 provides 2.625" over stock height unloaded. I never take my iKamper Mini off and depending on our trip can add 100-200lbs of gear in the rear. I'm assuming option 3 because the Eibach on lowest notch provides 2.5" of lift correct? I know they both will settle but looking for a slight rake when it's all done.

 

The lowest setting is suppose to give you 2”.

 

Meant the second notch giving 2.5". Thanks for pointing that out.

 

Good luck with your setup.

 

2nd alignment turned out great.

 

I’d like to know how because I have the same set up and I’ve had to cmc twice. I kinda have a hard time believing nobody rubs on lowest notch with 285/70, especially -10 offset. My wheels are 0 offset and still rub plastic lining, which I’ve also cut and will have to cut more.

 

I’m gonna assume you’re from Knoxville... where did you get your CMC done?

 

kingsport. Had a friend do it. I’ve got JBA upper control arms and alignment is perfect.

 

Not all vehicles are the same. I put a OME lift with UACs and got 3.75in lift over stock. Not everything is the same.

 

Do you have a pic of your alignment specs? I went though hell to get my alignment where it needs to be

 

I don’t have it on me. The guy that did my last alignment knew what he was doing and had it exactly where I wanted it I’m about 15-20 minutes. He had me stand there and look at the screen while he made the adjustments. I told him where I wanted it and that’s what he did.

 

Witchcraft cost extra

 

@Wheeler's Off-Road Inc 3 AAL, no squeaking, been good to me so far

 

Bro idk what to tell you, i try to stay away from cutting bc this is a brand new truck maybe some day with 35s. But yes, 100% 0 rub, before alignment there was minimal rubbing but after alignment it was gone for both front tires.