1 ton first gen Tacoma

Thanks for the compliments man I love how it turned out myself

 

People clearly wound pay stupid $ for that. 50k, enough? Start at 60k obo

 

Shit I doubt that but you find someone to buy it for 50k I’ll sell it tonight haha

 

Advertise it somewhere like Japan or Australia. They’re crazy enough

 

I’m good I want to be done with this truck and finally enjoy it I get the bed bobbed next week and rear bumper with winch setup in rear as well

 

Thanks for all the likes guys trucks been a fun build and is coming together well

 

Nobody would give you that amount of money. But, i would if i had all the money in the world. Man, if only i could win the lottery. Truck is well worth it

 

truck is badass man... if you dont mind me asking, how much $ (parts & labor) you got in that bad boy?

 

I got around 30k into it but I’m lucky to have the friends I have to do the welding i wouldn’t want to know how much this thing would cost a person to have built it would be too much

 

oh lotta beer and pizza... well you and your friends do damn good work!

 

Lotta crown royal and lots of good friends thanks man

 

I know it isn’t worth nothing like 50 to 60k but if some crazy guy offered that it’s gone haha I’ll do 2 more haha

 

Man, love the build! Just last week I ordered damn near everything to set my prerunner up like yours. Wfo kit, fox coilovers, 40inch nittos, exc exc.... only difference is I have some donor 4inch tg springs for the rear I was gonna use. But I’m second guessing that idea.
I was curious if you had to swap anything out wiring wise for your 4x4 trans and such?

Super inspired, and pumped for my parts to arrive!

 

It depends what tranny you get if you get one with a kick down cable on it and just hook it up like your stock 2wd trans was but I had a trans out of a 4Runner with electric kick down inside trans and so had to add that I’d find one out of a truck with the kick down cable on it

 

Also Potter, I installed gears front and rear on my axles today, and bolted wheels on. I got to looking and I notice little space between wheel, and calipers which aren’t on yet.
My question is, I have procomp 17x9 -6 offset 4.75 backspacing.... and it doesn’t look like I’m gonna fit a caliper in there... maybe I’m jumping the gun?
Any insight to what you used?

 

My wheels are 17x9 with -12 offset with 4.5 back spacing and I have wheel spacers on rear to make it match the front axle width but I can tell you there’s not allot of space at all on front end between wheel and caliper but mine do not rub at all

 

Man I sure hope I didn’t mess up on wheels...
I’ll order up my calipers tomorrow and see what I got.
Did you ever branch into another rear leaf setup by the way?

 

Nope not yet I’m getting the bed bobbed and rear bumper done as we speak and plan on running Chevy 63s in rear but don’t have a complaint with my stock rear springs like it as low as I can keep it

 

What year of front end do you have for your truck ?

 

06 superduty, with matching sterling 10.5.
And you’ve almost convinced me to keep my rears also lol. Only exception is I will be pulling my little camper ideally with this thing so I’ll need to stilt it up just a hair.... (we can experiment together)