GA Mod Day Jan. 30, 2021

Also Cory welds so that could be an option if anybody needed welding done. I think next week I'll go thru the list and see who plans to actually show up and what's needing to be done.

 

Yeah, but he does that as side income (at least I'm pretty sure). I doubt that is on the table for free...

 

Well I'd hope most people would assume welding isn't free

 

Sorry welding isn’t free haha

 

Since the hammer hangers will be done this Saturday... How much for a Marlin Crawler Cam Tab Gusset weld job?

 

So looks like I'll definitely be making it, finally got the notice for the day off. From the looks of it tho, seems like a busy list to get through, so I'll probably hold off on all the suspension work, and just do my bolt on sliders. I don't have a powerful enough drill to make an additional hole for the sliders though, so if someone has one they can bring that'd really help me out. Thanks!

 

In

Looking to get some knowledge and watch some stuff happen.

 

I’ll add you to the list

 

I am going to try and make this one.

I will probably just BS and help out others. The next few projects on my truck are fairly involved - rather do them at my house just in case...

In for the BBQ!

 

This tends to be what usually happens Looking forward to finally meeting ya too!

 

Is anyone attending that has purchased the tools to make their own relay box? (crimpers, etc). I am going to start working on this but the initial buy in with tools and parts is a bit steep.

 

I have a strut spring removal tool. Depending on where the meet is I could help with that. I'm a bodyman at a local shop in pocatel and change them all the time.

 

I was just about to ask if anyone needed any electrical work done. I could bring some tools.

I have been planning on building that relay box for a while now. I have all the parts, too. Maybe you will be my incentive to finally build it!

 

I know that I have the tools to unpin the fuse block when I got mine from the old owner that crashed it I had do some rewiring in the fuse block from cut wires. Let me know what all it says you need and I can see if I have it

 

I was intending to bring my computer and cable if any 3rd gen folks were looking to get Ovtuned.
I plan to do this at what I would normally do for groups of 4 or more to honor Mod Day: $200.
This would include updating your Toyota Calibration if needed, the OVtune file that best suits you and your truck, and then some additional tweaks that I recommend and can discuss with you there.

Please let me know if you are interested either here or shoot me a pm, so that I can prepare and make sure I have acquired all the files I need.

If i've already tuned you before, I can update you/add some tweaks if needed for free. Just talk to me when I see you there!
I plan to get my hands dirty with my own mods and helping/learning with others -- So i'll just get you tuned where I can that day.

If you have a 3rd gen and aren't really sure if you want to get tuned but at least want to see if you are up-to-date with Toyota's calibration and get a TSB installed if your dealership didn't do that for you, I'll do that for y'all for free. I'd say 2/3 of trucks that I have tuned are not up to date.

 

Dang I’m working that weekend. Maybe I’ll be able to come to the next one.

 

I've got a box that I was gonna throw in the truck but went a different direction. Been meaning to post it for sale as it's just sitting around, you can take a look at it if you want

 

Can we also do this next month as well? If not....maybe in March? I have to work the 30th ‍.....but would love to attend! Hope to meet you all soon! Thanks!

 

Not too long now. Hoping the weather holds out and we have a decent day