Shop Time w/T.W. Friends.

Also I kinda like the non grease-able u-joints seeing that nobody probably will grease them. Also think they last a bit longer depending on brand

 

Test drive is sat, no more vibes. Sure adds a amount of pucker that I purposely put that zerk face the other direction. All apart on the bench it looked like it would have more clearance. I'll get over it. Fired up the quad for a few before I wrapped up.

 

Susuki!! What the.... only ever had 1 susuki ... the rest were honda, Yamaha, Polaris, can-am and 1 ktm dirt bike

 

They had a non grease-able one available like $6.00 more. I did a little research last year when I put all new joints in the Corvette and went with the non grease-able due to them being stronger not cross drilled for grease. I generally try to grease chasis and joints at least every other oil change. I may step up my game and hit them every time.

 

I've always kind of like Suzuki but if I ever were to get a dual sport it would be a Honda XR650 they haven't changed them in 30 years, for a reason.

 

A grease needle is what you need my friend. It comes in handy in those cases. Worked like a dream on my 2nd gen's front drive shaft.

 

I have a para ordinance lda 7.45, it’s double action only.

 

Ugh.... shall I enjoy a Guinness while watching 2 old men throw footballs or shall I sober up for Monday tough decision

 

They called back a bit ago. Wanted me to verify that I was tested recently, which they already knew, then told me I had tested negative but could still test positive in the future if I'm exposed.

No shit.

I'm thoroughly confused but happy that I at least have that answered.

I was hoping that they were contacting me to schedule a vaccine shot but apparently not.

 

I have had a 06 Vinson since 2009. Good running machine, has high and low with a 5 speed, and beat the pants off my 450es Honda. Someday I’ll get a 750 kingquad I think.

 

You and your wife sore today from skiing?

 

I have had the same problem with RCI Fuel tank skid I just installed today. One of those nuts would have been great. Do they have a name & where can I get one? All I need is one. Thanks.

 

Baked some more bread today

 

Nice

 

That's called a connecting bolt.

 

McMaster Carr?

 

Your more than welcome to have all three of the ones pictured. Drop me a PM of address and I'll drop them in the mail tomorrow. I forget now why I had these extra, either I made 4 a little longer or shorter. Most likely a little longer. I have to stop by post office tomorrow anyway. No charge.
Edit; I made these custom, perhaps send the extras to RCI, tell them get with the program.

 

Just checking to make sure your paying attention