Alabama thread!

From AlabamaWX

DRY WEATHER FOR ALABAMA TODAY: A weak surface front is drifting into the far southern part of Alabama today, and a surge of drier and slightly cooler air is dropping southward. For most of the state we expect a decent amount of sun today with a high in the 50s for the northern half of the state… South Alabama will see 60s again this afternoon. Clouds will increase tonight as a wave forms on the front to the west.

TOMORROW/FRIDAY: The weather turns wet statewide. We expect periods of rain tomorrow and Friday with a cloudy sky; rain amounts of at least one inch are likely with isolated heavier amounts. No risk of severe storms, and probably no thunder. Highs will be in the 50s.

THE ALABAMA WEEKEND: We will squeeze in a day day Saturday… with a partly sunny sky we expect a high in the mid 50s again. Clouds return Sunday, and while a decent part of the day will be dry, a few afternoon showers are likely over the northern and western counties. The high Sunday will be close to 60 degrees.

MONDAY: Rain and a few thunderstorms are likely across the state Monday. The European global depicts a deep surface low in far western Kentucky, with a warm, moist, unstable airmass across Alabama and some potential for strong, maybe even severe thunderstorms. But the American GFS suggests just rain with some thunder; we will get much better resolution on how this unfolds later this week.



REST OF NEXT WEEK: The rest of the week looks generally dry; an upper trough could squeeze out a few sprinkles Tuesday night or early Wednesday, however. Highs will be mostly in the 50s with lows in the 30s, right at seasonal averages for late January. Still no sign of any winter weather issues or bitterly cold air through early February.



ON THIS DATE IN 1937: The wettest Inaugural Day of record with 1.77 inches of rain in 24 hours. Temperatures were only in the 30s as Franklin D. Roosevelt was sworn in for his second term.

 

Likewise man, it was a pleasure!!

Nice man, crazy the prices of it rn...

 

Morning fellas!

 

Morning Bama!

 

Hows it hanging bud?

 

Limp and to the left.

 

Some of the finest poetry ever written by modern man-

I stand on the hill, not for a thrill

But for a breath of a fresh kill

And

Never mind the man who contemplates

Doin’ away with license plates

He stands alone, anyhow

Baking the cookies of discontent

By the heat of the laundromat vent

Leaving his soul …

then, like in poetry

I go dot dot dot

You know, kinda off center, then I

drop down, then I go …

Leavin’ his soul, partin’ the waters

of the medula oblongata

of

Mankind

https://youtu.be/KDKBJxRh_UU

 

Just filed my taxes even though it wont process until Feb 12th lol

 

Evenin fellas

 

Sup Phil, awfully quite in here today. How's the sick room treating you tonight?

 

Need some help boys


https://youtu.be/O88xEdI9bA0

 

Sup Justin
It's busy as hell right now.

Sup Brian

 

I’ve had a similar noise for a long while but is starting to get worse it’s a popping as I turn and go slow speed. I’ve rebuilt my uca bushings/spacers, I think it’s either tie rods lbj or bushings in lca.

 

Sup Caleb

 

Just noticed it the other day and that higher Whitney noise has been present for a while now. That leaf spring sound is new

 

Sitting here stressing over damn noises lol

 

It's a pivot of some sort I know that narrows it down to UBJ, LBJ, LCA bushings, UCA bushings, Inner or outer tie rod ends. Best way to diagnose is get a mechanics stethescope and have someone jounce the truck like that putting the stethescope at each point. The loudest part is the culprit. Sometimes it can be more than one. It also sounded like the spring was moving just a bit on the perches which is typical noise on COs with no rubber isolation to the metal like there is on the stock set up. Oh also the lower uniball or pivot on your CO could be making noise.

Why stress, you've heard my truck and seen it

 

Just waiting on sleep time, what you up too?

Yea I’ve just started calling it race shock noise lol, I’ve got a spare set of low mileage lca I been wanting to swap in and try. Rebuild my arms with white line bushings and some new bj.

 

Sup Skip

 

Just workin a bit