Lifted 1st gens let's see em

I hear ya. So new stock springs on bottom perch? I won’t gain any level though. I’m
Glad you like your set up, gives me hope. I’ve been thinking about all this for months, so many different possibilities.

 

if your springs are worn out, new stock springs can lift it a bit on the front but it will be stock height, no need for an aal. thats why i went with the ome springs up front. from what i understand anything past the second perch and ride quality decreases.

 

I have bilstein 5100. With a 2” add a leaf on the rear and 2007 Tacoma front coil springs.

 

What bumper is that?

 

Interesting, whats the orange color called?

 

It’s called Grabber Orange. It’s a Ford Mustang color

 

@Orange01tAcO, How do you like those Maxxis Razrs?

 

I have had mine for about 7 thousand miles. So far I love them. They wear really even. They are the best set of tires I have ever ran. They are not the best in snow but I have never got stuck in them

 

Can you guys please tell me everything I need to make my truck below look like the one above. I plan on having everything installed by a pro. 1.5 -2" would be sweet.

I see you can get the whole OME lift kit on Bilstein. Wondering how visible that yellow would be. And can you mix and match the 5100 with OME springs. I feel like thats what you lads are doing.

 

5100's all around, ome 881 fronts springs on the lowest setting, and icon prog (3 leaf) aal or i heard the wheelers prog (3 leaf) aal is comprarable.

 

Here’s my 2003 Tacoma Xtracab In Green Lifted

 

what lift you got on that all the way around?

 

What lift do you have in the front?

 

I need some help figuring out what lift kit would be best for me. I own a 2001 Tacoma Xtracab, I have some 33" on it (rubs on the frame when fully lock) and I want to get a kit that would more focused on off-roading. I want to lift it 3" front and back. I went muddin last weekend and I am surprised did get stuck but I want some more clearance. Attached is my truck.

 

Haven't been on a forum for about 10 years now. But

Got the truck about 3 months ago and been loving it. Currently has ome 880s, 1/2"strut spacers to fix the wrong spring rate used, ome struts/shocks and dakar leaf springs

 

Moog 81078 coils on Bilstein 5100's at highest setting, 1.25" block in the rear.

 

what are your billies set at? With what coils?

 

I have the shocks maxed, coils are Moog 81078 about 100lbs spring rate over stock spring, cut splash guards and banged pinch welds. Still rubs when you're gettin it. I have 33x10.5 with -19mm offset

 

very nice lookin truck! Was it hard to get those coils compressed to get that clip on the top setting?