Let's see your vintage aftermarket wheels

@Pookiez31 in a perfect world, the answer would be yes.....but there are too many variables involved.

What size tires, bbk or no, etc...

I will go out on a limb and say if you run a stock size tire with no lift on your truck.... and then confirm that it clears the brake caliper, and confirm the centerbore is the same size or else buy hub centric rings...

....then it should fit with no spacers. The look would be a little more poke (outisde) compared to a stock 16" wheel.

This shouldnt discourage you. Part of the allure of classic jdm wheels is the finding that rare uncommon wheel...and then doing whats necessary to make them fit safely.

 

what's YAJ?? Yahoo Japan?? How do you guys look for these vintage wheels? I'd like to start hunting.

 

What clearance are you concerned about? Calipers? That size/offset is pretty common with new aftermarket wheels so I would imagine as long as caliper clearance is good there's no difference here versus a set of 16x8 +0 SCS, Volk...etc. Pretty sure I've seen those Lodio Drive on another 2nd Gen Tacoma.

 

Yahoo! Auctions Japan

Pay attention to how they list things there for 6x139.7mm wheels. Then use that nomenclature for your search criteria.

 

I've run Lodio Drives on a 3rd Gen Tacoma and they have low disk clearance. You will likely need spacers (I did, at least).
If they have pockets in the hub, then 3/4" spacers, if not then at least 1" spacers.

 

Drool ....

 

Yes, the Auswuch are definitely an amazing wheel. Love the set I grabbed off of SaveTheWheels.

 

Holy CRAP! This are sooooo good looking! I need a set of those. What size is that?

 

Those are 16x8 -1. Shoot me a PM if you want help finding a set.

 

Do they fit without spacers?

 

I’m running a 5mm spacer to clear the caliper. But it’s a Sequoia so not sure if the brakes differ that much.

Ended up running Lexus IS300 ARP extended studs and a slip on 5mm spacer. Clears great, and I never have to worry about wheel stud failure or not having enough threads.

 

Not vintage nor 6-lug....right now. But I think there's a high likelihood there will be a 6x139.7 because #ssr #auswuch

SSR Devide Xrosswuch
https://youtu.be/lqNaGsyUA4A

 

@SUMOTNK yeah, saw those announced and was a little disappointed in the design and spec offerings. I'm not too sure on a 6-lug offering tbh, only because Work and SSR have really been ignoring that portion of the market. Rays is the only manufacturer that's been focused on quality, enthusiast oriented 6-lug wheels lately, but even they're moving away from 16" (to an extent).

 

It was sad to see the Work Crag S1 move away from 6 lug to only 5 for sure. I also don’t see much hope for a 6 lug from the new ssr. It seems more like another retro style tuner wheel and I doubt we’ll see any truck sizings.

Sadly most 4x4 enthusiasts prefer the cheaper black wheel offerings. I’ll just stop there.

 

Lodio Drive Six, made by Super Star Wheels
17x8 -1
PCD 6x139.7
cb 112

 

16" Weds Mad Blade

 

@savethewheels would you be able to import Raguna Wheels?

 

Yes, of course! There are a few sets available currently, if you're ready to pull the trigger.

 

How can I find more info on what sets are available?