What Have You Done To Your 2nd Gen Tacoma Today?

Ditched the Icons for Kings.

 

how'd you put the raptor lights?

 

Nice

 

Never understood why people seem to think weight directly over the axle is best. You would get a leverage effect by putting the weight near the tailgate and effectively amplify the actual weight of the bags. Close to the cab would reduce the effective weight felt by the axle. It's simple physics.

 

Is this good enough?

If not I can take more tomorrow because my wife and I are on a short vacation at Lake Arrowhead without the Tacoma.

11 hours ago I could see the blacktop of the parking lot in its entirety. That blue Matrix is ours and we should have some fun getting it out of here. Lol

 

It looks like an alarm to me but I've never seen that particular brand/model. The adjustment looks like the adjustment for a shock/impact sensor.

 

One more from this weekend. Fitted up the RTT annex that i got for dirt cheap a while back. Much needed changing space for the GF lol.

 

Thnx for the pic, that’s pretty cool. I was curious where it bolted to. Have fun on the vacation!!!! Lol

 

Ahhh that would make sense. I ended up pulling it from the car. Since it doesn't really have a label or anything like the tracker thing did. I'll have to double check. My mom has the same nissan I'll look under the dash next time I see her.

 

Would adding some near the tailgate and near the cab work better? Or just near the tailgate?

 

Somebody asked for a hat free picture.

 

Weight close to the tailgate would produce more downward force at the tires on the ground than the same weight over the axle or near the cab. Leverage. Think of it like this: Pick up a 10 lb weight directly with your hands close to your body. Feels like 10 lbs (like 10lbs directly over the axle). Now put that 10 lbs on the end of a 6ft long 2x4 and try to lift if from the other end of the 2x4. Feels like more than 10lbs right? (like 10lbs near the tailgate).

 

Painted and installed my 4x Innovations rear bumper. Very happy with the way it turned out. I aim more towards the understated side of aesthetics.

 

Did you paint or Powdercoat it yourself or did they do it for you?

 

Made a forest loop to test for APRS coverage in the area and found a little damp dirt, just barely enough to mark the truck.

 

I removed the rear seats and rear console from my access cab and built a platform in its place. Photos coming

 

Installed some Timbren active off-road bump stops.
As you can see the drivers side stock bump stop broke off.
The back end of the truck is looking nasty with the fluid film full of road grime.

Looking forward to smooth hits instead of the backbreaking bottom outs!

 

I painted it used self etching primer and rustoleum hammered black. Made sure to prep it thoroughly. Love the result. That hammered finish is my new go to for DIY painting. Word of caution though, it is a little more gray that straight black.

 

Haha...yep MPG...

 

You don’t want weight at the tailgate. Ideally you want it just forward the rear axle. The further back you go you’ll be taking pressure off the front axle and will cause issues with steering.