Shop Time w/T.W. Friends

I hope all goes well !!

At least you have a decent place not like your in an unfinshed basement being Florida most likely not a option .

I would not want to be in your General Managers shoes right now.

 

Was it onsite at work or did you have to go to another place?

 

Had to put a lockout on the air compressor breaker. Supposed to be 19° tonight and it won’t start in the morning even with the doghouse and light bulb on.

 

OSHA approved lock out tag out!

 

Does the system have that many leaks the compressor cycles all night long ?

Moisture in the lines Freezing ?

I am guessing a Dragon is not part of your Cold weather Diesel Starting Goodies makes short work of warming up most things .

 

Only 19?

 

We have a couple of small leaks and also an automatic drain on the tank that releases every 30 minutes that will make it cycle a few times. I guess moisture in the unit itself on top causes it to trip the breaker, it's a Sullair screw type compressor. If it gets below about 28 degrees it will trip the breaker in the morning if not left on.

 

Somebody missed the company LOTO training

 

Meanwhile in.......

 

I don't remember much about safety day but I do know they said use a red marker, I couldn't get the top off the red one so I had to use black.

 

9-3 = Shane, Good Morning

 

OSHA would like a word with you...

 

We have an offsite training center. Used to be the old middle school, they put up another large building there for lab (shop), half that building is for Instrumentation & Control / Electricians and the other half Mechanical Maintenance. It's a nice set up really.

 

At least it’s the opposite of this situation!

 

I like the makeshift bare copper "lockout" to keep the breaker on. Except that's not how that works, that's not how that works at all. It'll still trip, just can't reset it easy...

 

Howdy Fellas

 

Uh...

https://www.fastenal.com/products/details/1092679